Specifications
7-97
Cisco MGX 8850 (PXM45) and MGX 8950 Software Configuration Guide
Release 3, Part Number 78-14788-01 Rev. C0, January 2004
Chapter 7 Switch Operating Procedures
Diagnostics Support MGX 8850 and MGX 8950 Switches
Example 7-6 Configuring both online and offline diagnostics at the same time
In the following example, the user enables both online and offline diagnostics for all cards in the switch.
A medium offline diagnostics coverage test is scheduled to run every Monday and Friday at 21:30 (8:30
PM).
cnfdiag 7 enable enable medium 21:30 -M-F
To display your online diagnostics test configuration and ensure all the parameters have been set
correctly, enter the dspdiagcnf command.
Displaying Online and Offline Diagnostics Test configuration information
Enter the dspdiagcnf command to display the current diagnostics configuration on a card. The
dspdiagcnf command displays the following information:
• Slot number
• Whether online diagnostics are enabled or disabled
• Whether offline diagnostics are enabled or disabled
• The type of coverage currently running for offline diagnostics
• The Start time for offline diagnostics
• The day(s) of the day on which offline diagnostic tests are scheduled to run.
The following example shows the information displayed by the dspdiagcnf command.
Unknown.7.PXM.a > dspdiagcnf
Online -------------- Offline -------------
Slot Enable Enable Coverage StartTime SMTWTFS
---- ------ ------ -------- --------- -------
1 enable enable light 15:13 ---W---
2 enable enable light 15:13 ---W---
3 enable enable light 15:13 ---W---
4 enable enable light 15:13 ---W---
5 enable enable light 15:13 ---W---
6 enable enable light 15:13 ---W---
7 disable enable light 15:13 ---W---
8 enable enable light 15:13 ---W---
9 enable enable light 15:13 ---W---
10 enable enable light 15:13 ---W---
11 enable enable light 15:13 ---W---
12 enable disable light 15:13 ---W---
13 enable enable light 15:13 ---W---
14 enable enable light 15:13 ---W---
15 disable disable light 15:13 ---W---
16 disable disable light 15:13 ---W---
17 enable enable light 15:13 ---W---
18 enable enable light 15:13 ---W---
19 enable enable light 15:13 ---W---
Type <CR> to continue, Q<CR> to stop: 20 enable enable light 15:13