Specifications

xxvii
Cisco MGX 8850 (PXM45) and MGX 8950 Software Configuration Guide
Release 3, Part Number 78-14788-01 Rev. C0, January 2004
About This Guide
Related Documentation
Cisco MGX 8830 Multiservice Switch Release 3
The product documentation for the installation and operation of the Cisco MGX 8830 Release 3 switch
is listed in Table 7.
Table 6 SES PNNI Controller Release 3 Documentation
Title Description
Cisco SES PNNI Controller Software Configuration
Guide, Release 3
DOC-7814258=
Describes how to configure, operate, and maintain the SES PNNI
Controller.
Cisco SES PNNI Controller Command Reference,
Release 3
DOC-7814260=
Provides a description of the commands used to configure and
operate the SES PNNI Controller.
Cisco MGX and SES PNNI Network Planning Guide
DOC-7813543=
Provides guidelines for planning a PNNI network that uses the
Cisco MGX 8850 (PXM45 and PXM1E), Cisco MGX 8950, and
the Cisco BPX 8600 switches. When connected to a PNNI
network, each Cisco BPX 8600 series switch requires an SES for
PNNI route processing.
Table 7 Cisco MGX 8830 Release 3 Documentation
Title Description
Cisco MGX 8830 Hardware Installation Guide, Release 3
DOC-7814547=
Describes how to install the Cisco MGX 8830 edge switch. This
documentation explains what the switch does and covers site
preparation, grounding, safety, card installation, and cabling. The
Cisco MGX 8830 switch uses a PXM1E controller card and
provides PNNI support for narrow band service modules.
Cisco MGX 8850 (PXM1E) and MGX 8830 Software
Configuration Guide, Release 3
DOC-7814248=
Describes how to configure the Cisco MGX 8850 (PXM1E) and
the Cisco MGX 8830 switches with PXM1E controller cards to
operate as ATM edge switches. This guide also provides some
operation and maintenance procedures.
Cisco MGX 8830, MGX 8850 (PXM45 and PXM1E), and
MGX 8950 Command Reference, Release 3
DOC-7814789=
Describes the PXM commands that are available on the CLI of
the Cisco MGX 8830, Cisco MGX 8850, and Cisco MGX 8950
switches.
Cisco SNMP Reference for MGX 8850 (PXM45 and
PXM1E), MGX 8950, and MGX 8830, Release 3
DOC-7814747=
Provides information on all supported MIB objects, support
restrictions, and traps for AXSM, AXSM-E, SRM-3T3, SRME,
FRSM12, PXM45, PXM1E, RPM-PR, and RPM-XF.
Cisco AUSM Software Configuration Guide and
Command Reference for MGX 8850 (PXM1E) and MGX
8830, Release 3
DOC-7814254=
Provides software configuration procedures for provisioning
connections and managing the AUSM cards supported in this
release. Also provides command descriptions for all AUSM
commands.