Specifications

xxv
Cisco MGX 8850 (PXM45) and MGX 8950 Software Configuration Guide
Release 3, Part Number 78-14788-01 Rev. C0, January 2004
About This Guide
Related Documentation
Cisco MGX 8830, MGX 8850 (PXM45 and PXM1E),
and MGX 8950 Command Reference, Release 3
DOC-7814789=
Describes the PXM commands that are available on the CLI of the
Cisco MGX 8830, Cisco MGX 8850, and Cisco MGX 8950
switches.
Cisco SNMP Reference for MGX 8850 (PXM45 and
PXM1E), MGX 8950, and MGX 8830, Release 3
DOC-7814747=
Provides information on all supported MIB objects, support
restrictions, and traps for AXSM, AXSM-E, SRM-3T3, SRME,
FRSM12, PXM45, PXM1E, RPM-PR, and RPM-XF.
Cisco Frame Relay Software Configuration Guide and
Command Reference for MGX Switches (PXM1E)
DOC-7814255=
Provides software configuration procedures for provisioning
connections and managing the FRSM cards supported in this
release. Also provides command descriptions for all FRSM
commands.
Cisco AUSM Software Configuration Guide and
Command Reference for MGX 8850 (PXM1E) and
MGX 8830, Release 3
DOC-7814254=
Provides software configuration procedures for provisioning
connections and managing the AUSM cards supported in this
release. Also provides command descriptions for all AUSM
commands.
Cisco CESM Software Configuration Guide and
Command Reference for MGX 8850 (PXM1E) and
MGX 8830, Release 3
DOC-7814256=
Provides software configuration procedures for provisioning
connections and managing the CESM cards supported in this
release. Also provides command descriptions for all CESM
commands.
Cisco MGX and SES PNNI Network Planning Guide
DOC-7813543=
Provides guidelines for planning a PNNI network that uses Cisco
MGX 8850 (PXM45 and PXM1E), Cisco MGX 8950, and Cisco
BPX 8600 switches. When connected to a PNNI network, each
Cisco BPX 8600 series switch requires an SES for PNNI route
processing.
Cisco MGX Route Processor Module (RPM-XF)
Installation and Configuration Guide, Release 3
OL-2768-01 (online only)
Describes how to install and configure the Cisco MGX Route
Processor Module (RPM-XF) in the Cisco MGX 8850 Release 3
switch. Also provides site preparation, troubleshooting,
maintenance, cable and connector specifications, and basic Cisco
IOS configuration information.
Cisco VISM Installation and Configuration Guide,
Release 3.0
OL-2521-01
Describes how to install and configure VISM in the Cisco MGX
8850, Cisco MGX 8250, and Cisco MGX 8230 Release 3 switches.
Also provides troubleshooting, maintenance, cable and connector
specifications, and Cisco CLI command configuration information.
Release Notes for Cisco Voice Interworking Service
Module Release 3.1
OL-2785-01
Provides new feature, upgrade, and compatibility information, as
well as known and resolved anomalies.
Regulatory Compliance and Safety Information for the
Cisco MGX 8830, MGX 8850 (PXM45 and PXM1E),
and MGX 8950 Switches
DOC-7814790=
Provides regulatory compliance, product warnings, and safety
recommendations for the Cisco MGX 8830, Cisco MGX 8850
(PXM45 and PXM1E), and Cisco MGX 8950 switches.
Table 4 Cisco MGX 8850 (PXM1E) Release 3 Documentation (continued)
Title Description