Specifications

xxiv
Cisco MGX 8850 (PXM45) and MGX 8950 Software Configuration Guide
Release 3, Part Number 78-14788-01 Rev. C0, January 2004
About This Guide
Related Documentation
Cisco MGX 8850 (PXM1E) Multiservice Switch Release 3
The product documentation for the installation and operation of the Cisco MGX 8850 (PXM1E)
Multiservice Switch Release 3 is listed in Table 4.
Cisco MGX and SES PNNI Network Planning Guide
DOC-7813543=
Provides guidelines for planning a PNNI network that uses the
Cisco MGX 8850 (PXM45 and PXM1E), Cisco MGX 8950, and
the Cisco BPX 8600 switches. When connected to a PNNI network,
each Cisco BPX 8600 series switch requires an SES
3
for PNNI
route processing.
Cisco MGX Route Processor Module (RPM-XF)
Installation and Configuration Guide, Release 3
OL-2768-01 (online only)
Describes how to install and configure the Cisco MGX Route
Processor Module (RPM-XF) in the Cisco MGX 8850 Release 3
switch. Also provides site preparation, troubleshooting,
maintenance, cable and connector specifications, and basic Cisco
IOS configuration information.
Cisco VISM Installation and Configuration Guide,
Release 3
OL-2521-01
Describes how to install and configure VISM
4
in the Cisco MGX
8850, Cisco MGX 8250, and Cisco MGX 8230 Release 3 switches.
Also provides troubleshooting, maintenance, cable and connector
specifications, and Cisco CLI command configuration information.
Release Notes for Cisco Voice Interworking Service
Module Release 3.1
OL-2785-01
Provides new feature, upgrade, and compatibility information, as
well as known and resolved anomalies.
Regulatory Compliance and Safety Information for the
Cisco MGX 8830, MGX 8850 (PXM45 and PXM1E),
and MGX 8950 Switches
DOC-7814790=
Provides regulatory compliance, product warnings, and safety
recommendations for the Cisco MGX 8830, Cisco MGX 8850
(PXM45 and PXM1E), and Cisco MGX 8950 switches.
1. CLI = command line interface
2. MIB = Management Information Base
3. SES = Service Expansion Shelf
4. VISM = Voice Interworking Service Module
Table 3 Cisco MGX 8850 (PXM45) Release 3 Documentation (continued)
Title Description
Table 4 Cisco MGX 8850 (PXM1E) Release 3 Documentation
Title Description
Cisco MGX 8850 (PXM45 and PXM1E) Hardware
Installation Guide, Release 3
DOC-7814250=
Describes how to install the Cisco MGX 8850 routing switch. This
documentation explains what the switch does and covers site
preparation, grounding, safety, card installation, and cabling. The
Cisco MGX 8850 switch uses either a PXM45 or a PXM1E
controller card and provides support for both broadband and narrow
band service modules.
Cisco MGX 8850 (PXM1E) and MGX 8830 Software
Configuration Guide, Release 3
DOC-7814248=
Describes how to configure the Cisco MGX 8850 (PXM1E) and the
Cisco MGX 8830 switches with PXM1E controller cards to operate
as ATM edge switches. This guide also provides some operation and
maintenance procedures.