Specifications

7-57
Cisco MGX 8850 (PXM45) and MGX 8950 Software Configuration Guide
Release 3, Part Number 78-14788-01 Rev. C0, January 2004
Chapter 7 Switch Operating Procedures
Managing Service Class Templates
The following sections display the reports for each of the dspcdsct command options.
Note For descriptions of the Card SCT parameters refer to Service Class Template Tables 7-6 through 7-11 in
the Displaying Port SCT Settings earlier in this chapter.
Card SCT Bandwidth and Policing Parameters (dspcdsct bw)
The following report appears when you enter the dspcdsct bw command:
pop20two.10.AXSM.a > dspcdsct bw
+-----------------------------------------------------------------------------+
Service Class Template [2] : Bw and Policing Parameters
+-----------------------------------------------------------------------------+
| SERV-TYPE | PCR | SCR | MCR | MBS | CDVT | ICR |
+-----------------------------------------------------------------------------+
| CBR.1 | 00001000 | 00000000 | 00000000 | 00000001 | 00250000 | 00000000 |
| VBR-RT.1 | 00001000 | 01000000 | 00000000 | 00000050 | 00250000 | 00000000 |
| VBR-RT.2 | 00001000 | 01000000 | 00000000 | 00000050 | 00250000 | 00000000 |
| VBR-RT.3 | 00001000 | 01000000 | 00000000 | 00000050 | 00250000 | 00000000 |
| VBR-nRT.1 | 00001000 | 01000000 | 00000000 | 00000050 | 00250000 | 00000000 |
| VBR-nRT.2 | 00001000 | 01000000 | 00000000 | 00000050 | 00250000 | 00000000 |
| VBR-nRT.3 | 00001000 | 01000000 | 00000000 | 00000050 | 00250000 | 00000000 |
| UBR.1 | 00000010 | 00000000 | 00000000 | 00000001 | 00250000 | 00000000 |
| UBR.2 | 00000010 | 00000000 | 00000000 | 00000001 | 00250000 | 00000000 |
| ABR | 00000010 | 00000000 | 01000000 | 00000001 | 00250000 | 00000000 |
| CBR.2 | 00001000 | 00000000 | 00000000 | 00000001 | 00250000 | 00000000 |
| CBR.3 | 00001000 | 00000000 | 00000000 | 00000001 | 00250000 | 00000000 |
+-----------------------------------------------------------------------------+
Table 7-31 Options for dspcdsct Command
Option Description
bw Displays bandwidth and policing parameters.
gen Displays general SCT parameters.
cosb Displays COSB parameters.
vcThr Displays virtual circuit threshold parameters.
cosThr Displays COSB threshold parameters.