Specifications

xxiii
Cisco MGX 8850 (PXM45) and MGX 8950 Software Configuration Guide
Release 3, Part Number 78-14788-01 Rev. C0, January 2004
About This Guide
Related Documentation
Cisco MGX 8850 (PXM45) Multiservice Switch Release 3
The product documentation for the installation and operation of the Cisco MGX 8850 (PXM45)
Multiservice Switch Release 3 is listed in Table 3.
Table 2 WAN CiscoView Release 11 Documentation
Title Description
WAN CiscoView Release 3 for the MGX 8850 Edge Switch,
Release 1
DOC-7811242=
Provides instructions for using this network management
software application that allows you to perform minor
configuration and troubleshooting tasks.
WAN CiscoView Release 3 for the MGX 8250 Edge
Concentrator, Release 1
DOC-7811241=
Provides instructions for using this network management
software application that allows you to perform minor
configuration and troubleshooting tasks.
WAN CiscoView Release 3 for the MGX 8230 Multiservice
Gateway, Release 1
DOC-7810926=
Provides instructions for using this network management
software application that allows you to perform minor
configuration and troubleshooting tasks.
Table 3 Cisco MGX 8850 (PXM45) Release 3 Documentation
Title Description
Cisco MGX 8850 (PXM45 and PXM1E) Hardware
Installation Guide, Release 3
DOC-7814250=
Describes how to install the Cisco MGX 8850 multiservice switch.
This guide explains what the switch does and covers site
preparation, grounding, safety, card installation, and cabling. The
Cisco MGX 8850 switch uses either a PXM45 or a PXM1E
controller card and provides support for both broadband and narrow
band service modules.
Cisco MGX 8830, MGX 8850 (PXM45 and PXM1E),
and MGX 8950 Command Reference, Release 3
DOC-7814789=
Describes the PXM commands that are available on the CLI
1
of the
Cisco MGX 8830, Cisco MGX 8850, and Cisco MGX 8950
switches.
Cisco MGX 8850 (PXM45) and MGX 8950 Software
Configuration Guide, Release 3
DOC-7814788=
Describes how to configure the Cisco MGX 8850 (PXM45) and the
Cisco MGX 8950 switches with a PXM45 controller to operate as
ATM edge or core switches. This guide also provides some
operation and maintenance procedures.
Cisco SNMP Reference for MGX 8850 (PXM45 and
PXM1E), MGX 8950, and MGX 8830, Release 3
DOC-7814747=
Provides information on all supported MIB
2
objects, support
restrictions, and traps for AXSM, AXSM-E, SRM-3T3, SRME,
FRSM12, PXM45, PXM1E, RPM-PR, and RPM-XF.
Cisco Frame Relay Software Configuration Guide and
Command Reference for the MGX 8850 FRSM12 Card,
Release 3
DOC-7810327=
Describes how to use the high-speed Frame Relay
(FRSM-12-T3E3) commands that are available in the CLI of the
Cisco MGX 8850 (PXM45) switch.
Cisco AXSM Software Configuration Guide and
Command Reference for MGX 8850 (PXM45) and MGX
8950, Release 3
DOC-7814257=
This guide explains how to configure the AXSM cards for
operation and a command reference that describes the AXSM
commands in detail. The AXSM cards covered in this manual are
the AXSM/A, AXSM/B, AXSM-E, and AXSM-32-T1E1-E.