Specifications

7-50
Cisco MGX 8850 (PXM45) and MGX 8950 Software Configuration Guide
Release 3, Part Number 78-14788-01 Rev. C0, January 2004
Chapter 7 Switch Operating Procedures
Managing Service Class Templates
Port SCT COSB Parameters (cosb)
The following report appears when you enter the dspportsct cosb command:
pop20two.10.AXSM.a > dspportsct cosb
+-----------------------------------------------------------------------------------+
|Service Class Template [02] : COSB Parameters
+-----------------------------------------------------------------------------------+
| COSB | MIN-RATE | MAX-RATE | MIN-PRIORITY | EXCESS-PRIORITY | ERS ENABLE | CLR |
+-----------------------------------------------------------------------------------+
| 0001 | 00000000 | 00000100 | 000 | 002 | ENABLE | 10^-01 |
| 0002 | 00000000 | 00000100 | 000 | 002 | ENABLE | 10^-01 |
| 0003 | 00000000 | 00000100 | 000 | 000 | DISABLE | 10^-05 |
| 0004 | 00000000 | 00000100 | 000 | 001 | DISABLE | 10^-03 |
| 0005 | 00000000 | 00000100 | 000 | 001 | DISABLE | 10^-01 |
| 0006 | 00000000 | 00000100 | 000 | 002 | DISABLE | 10^-01 |
| 0007 | 00000000 | 00000100 | 000 | 002 | DISABLE | 10^-01 |
| 0008 | 00000000 | 00000100 | 000 | 002 | DISABLE | 10^-01 |
| 0009 | 00000000 | 00000100 | 000 | 002 | DISABLE | 10^-01 |
| 0010 | 00000000 | 00000100 | 000 | 002 | DISABLE | 10^-01 |
| 0011 | 00000000 | 00000100 | 000 | 002 | DISABLE | 10^-01 |
| 0012 | 00000000 | 00000100 | 000 | 002 | DISABLE | 10^-01 |
| 0013 | 00000000 | 00000100 | 000 | 002 | DISABLE | 10^-01 |
| 0014 | 00000000 | 00000100 | 000 | 002 | DISABLE | 10^-01 |
| 0015 | 00000000 | 00000100 | 000 | 002 | DISABLE | 10^-01 |
| 0016 | 00000000 | 00000100 | 000 | 002 | DISABLE | 10^-01 |
+-----------------------------------------------------------------------------------+
Table 7-26 describes the SCT COSB parameters shown in the example.
GCRA-2 1 to 3 Generic Cell Rate Algorithm – Bucket 2. In ATM, an algorithm that
defines conformance with respect to the traffic contract of the
connection. For each cell arrival, the GCRA determines whether the cell
conforms to the traffic contract.
Note If UPC-Enable is set to disable, this object is not used.
Choose one of the following options to indicate how cells failing the
second policer bucket should be handled:
1 - Discard
2 - Set CLP bit
3 - Set CLP of untagged cells, discard tagged cells.
CI-CNTRL 1 -
Enabled
2 -
Disabled
Congestion Indication Control. Indicates whether the EFCI Threshold
has been exceeded.
Table 7-25 Service Class Template: SCT General Parameters (continued)
Parameter Range Description