Specifications
7-48
Cisco MGX 8850 (PXM45) and MGX 8950 Software Configuration Guide
Release 3, Part Number 78-14788-01 Rev. C0, January 2004
Chapter 7 Switch Operating Procedures
Managing Service Class Templates
Select one of the options to display one of the five SCT configuration reports, and replace <ifNum> with
the number of the port you want to view. Table 7-24 describes the reports for each of these options.
Note The option names are case sensitive. The switch does not recognize the vcthr option. You must enter
vcThr.
The following sections display the reports for each of the dspportsct command options.
Port SCT General Parameters (dspportsctgen)
The following report appears when you enter the dspportsct gen command:
pop20two.10.AXSM.a > dspportsct gen 1
+-------------------------------------------------------------------------------------------------+
Service Class Template [2] : General Parameters
+-------------------------------------------------------------------------------------------------+
| SERV-TYPE | COSB_NUM | CAC_TYPE | UPC_ENB | CLP-SELEC | GCRA-1 | GCRA-2 | CI-CNTRL |
+-------------------------------------------------------------------------------------------------+
| CBR.1 | 00000003 | B-CAC |GCRA1-ENB | 000000003 | DISCARD | DISCARD | DISABLED |
| VBR-RT.1 | 00000004 | B-CAC |GCRA 1 & 2| 000000002 | DISCARD | DISCARD | DISABLED |
| VBR-RT.2 | 00000004 | B-CAC |GCRA 1 & 2| 000000001 | DISCARD | DISCARD | DISABLED |
| VBR-RT.3 | 00000004 | B-CAC |GCRA 1 & 2| 000000001 | DISCARD | SET-CLP | DISABLED |
| VBR-nRT.1 | 00000005 | B-CAC |GCRA 1 & 2| 000000002 | DISCARD | DISCARD | DISABLED |
| VBR-nRT.2 | 00000005 | B-CAC |GCRA 1 & 2| 000000001 | DISCARD | DISCARD | DISABLED |
| VBR-nRT.3 | 00000005 | B-CAC |GCRA 1 & 2| 000000001 | DISCARD | SET-CLP | DISABLED |
| UBR.1 | 00000006 | LCN_CAC |GCRA1-ENB | 000000003 | DISCARD | DISCARD | DISABLED |
| UBR.2 | 00000006 | LCN_CAC |GCRA1-ENB | 000000003 | DSCD/SET-CLP | DISCARD | DISABLED |
| ABR | 00000001 | B-CAC |GCRA1-ENB | 000000003 | DISCARD | DISCARD | DISABLED |
| CBR.2 | 00000003 | B-CAC |GCRA 1 & 2| 000000001 | DISCARD | DISCARD | DISABLED |
| CBR.3 | 00000003 | B-CAC |GCRA 1 & 2| 000000001 | DISCARD | SET-CLP | DISABLED |
+-------------------------------------------------------------------------------------------------+
Table 7-24 Options for dspcdsct Command
Option Description
bw Displays bandwidth and policing parameters
gen Displays general SCT parameters
cosb Displays COSB parameters
vcThr Displays virtual circuit threshold parameters
cosThr Displays COSB threshold parameters