Specifications

7-46
Cisco MGX 8850 (PXM45) and MGX 8950 Software Configuration Guide
Release 3, Part Number 78-14788-01 Rev. C0, January 2004
Chapter 7 Switch Operating Procedures
Managing Service Class Templates
Type <CR> to continue, Q<CR> to stop:
card sct sctid major minor checksum status Description
type type ver ver
------ ---- ----- ----- ----- -------- ------ -----------------
AXSM CARD 00113 00001 0 0x5f9d2e0f valid default_upgrade
AXSM CARD 00114 00001 0 0x67c63533 valid default_upgrade
AXSM CARD 00115 00001 0 0x6fef3c57 valid default_upgrade
AXSM CARD 00121 00001 1 0x7189a28c valid default_upgrade
AXSM CARD 00122 00001 1 0x6fae1018 valid hi
AXSME PORT 00003 00001 0 0x46f6c566 valid default_upgrade
AXSME CARD 00003 00001 0 0x46f6c566 valid default_upgrade
Table 7-23 describes the dspscts command display components.
Displaying the SCT Assigned to a Port
To display the SCT assigned to a port, use the following procedure.
Step 1 Establish a configuration session at any user access level.
Step 2 Enter the dspports command:
pop20two.9.AXSM.a > dspports
Table 7-23 dspscts Command Display Components
Object Description
card type Type of Service Module to which the SCT is registered. Possible service modules
are AXSM, AXSME, PXM1E, and FRSM.
sct type Describes whether the SCT is a port SCT or a card SCT.
sct id A 16-bit number uniquely identifying the SCT.
major ver A 16-bit number which identifies the major version of the SCT. When an object
is deleted or added to an SCT MIB and an upgrade is required, the major version
number of the file changes. The major version of a file is always in consecutive
order and cannot be deleted.
minor ver A 16-bit number which identifies the minor version of the SCT. Each time an
SCT file is modified, saved, and downloaded, the minor version number changes.
A minor version changed does not require an upgrade or re-configuration of the
card/port database. The minor version of a file can be deleted; therefore, the
minor version number of a file may not be in consecutive order from the previous
minor version of the same file.
checksum An SCT identification number between 0 and 65535 that matches the checksum
embedded in the SCT file. The checksum number for all new SCT files is
advertised to the user through the release notes.
status Status of the SCT file on the switch. The status of the SCT would be marked as
“failed” if the file does not exist or does not match the major and minor versions.
description Describes the SCT file.