Specifications

7-20
Cisco MGX 8850 (PXM45) and MGX 8950 Software Configuration Guide
Release 3, Part Number 78-14788-01 Rev. C0, January 2004
Chapter 7 Switch Operating Procedures
Managing Redundant APS Lines
Table 7-4 cnfapsln Command Parameters
Parameter Description
-w <working line> Slot number, bay number, and line number of the active line
to configure, in the format:
slot.bay.line
Example: -w 1.1.1
-sf <signal fault ber> A number between 3 and 5 indicating the Signal Fault bit
error rate (BER), in powers of ten:
• 3 = 10
-3
• 4 = 10
-4
• 5 = 10
-5
Example: -sf 3
-sd <SignalDegradeBER> A power if 10 in the range 5-9 that indicates the Signal
Degrade bit error rate (BER):
• 5 = 10
-5
• 6 = 10
-6
• 7 = 10-7
• 8 = 10
-8
• 9 = 10
-9
Example: -sd 5
-wtr <Wait To Rest ore> The number of minutes to wait after the failed working line
has recovered, before switching back to the working line. The
range is 5-12.
Example:
-wtr 5