Specifications

7-13
Cisco MGX 8850 (PXM45) and MGX 8950 Software Configuration Guide
Release 3, Part Number 78-14788-01 Rev. C0, January 2004
Chapter 7 Switch Operating Procedures
Displaying Software Revisions in Use
To display the upgrades status of the runtime software on all switch cards, enter the dsprevs -status
command as shown in the following example:
pop20one.7.PXM.a > dsprevs -status
pop20one System Rev: 02.00 Jan. 24, 2001 18:37:16 PST
MGX8850 Node Alarm: NONE
Phy. Log. Cur Sw Prim Sw Sec Sw Rev Chg
Slot Slot Revision Revision Revision Status
---- ---- -------- -------- -------- -------
01 01 2.0(12) 2.0(12) 2.0(12) ---
02 02 2.0(12) 2.0(12) 2.0(12) ---
03 03 --- --- --- ---
04 04 --- --- --- ---
05 05 --- --- --- ---
06 06 --- --- --- ---
07 07 2.0(12) 2.0(12) 2.0(12) ---
08 07 2.0(12) 2.0(12) 2.0(12) ---
09 09 --- --- --- ---
10 10 --- --- --- ---
11 11 --- --- --- ---
12 12 --- --- --- ---
13 13 --- --- --- ---
14 14 --- --- --- ---
15 15 --- --- --- ---
16 16 --- --- --- ---
Type <CR> to continue, Q<CR> to stop:
Displaying Software Revisions for a Single Card
To display the boot and runtime software revisions in use on a single card, enter the dspcd <slot>
command as shown in the following example:
pop20one.7.PXM.a > dspcd 7
pop20one System Rev: 02.00 Jan. 24, 2001 18:39:00 PST
MGX8850 Node Alarm: NONE
Slot Number 7 Redundant Slot: 8
Front Card Upper Card Lower Card
---------- ---------- ----------
Inserted Card: PXM45 UI Stratum3 PXM HardDiskDrive
Reserved Card: PXM45 UI Stratum3 PXM HardDiskDrive
State: Active Active Active
Serial Number: SAK03260058 SAK0332009P SAK0325007Q
Prim SW Rev: 2.0(12) --- ---
Sec SW Rev: 2.0(12) --- ---
Cur SW Rev: 2.0(12) --- ---
Boot FW Rev: 2.0(12) --- ---
800-level Rev: 06 04 03
Orderable Part#: 800-05306-01 800-05787-01 800-05052-02
CLEI Code: h
Reset Reason: On Power up
Card Alarm: NONE
Failed Reason: None
Miscellaneous Information:
Type <CR> to continue, Q<CR> to stop: