Specifications

6-6
Cisco MGX 8850 (PXM45) and MGX 8950 Software Configuration Guide
Release 3, Part Number 78-14788-01 Rev. C0, January 2004
Chapter 6 Managing PNNI Nodes and PNNI Routing
Managing PNNI Nodes
Table 6-1 lists the parameter descriptions for the addpnni-summary-addr command.
Configuring SVCC RCC Variables
Configure SVCC-based RCC variables with the cnfpnni-svcc-rcc-timer command.
Geneva.7.PXM.a > cnfpnni-svcc-rcc-timer <node-index> [-initTime] [-retryTime]
[-callingIntegrityTime] [-calledIntegrityTime]
This defines a node’s initial PNNI SVCC-based variables, as shown in Table 6-2.
Configuring Routing Policies for Background Routing Tables
Configure the routing policies used for background routing tables generation with the
cnfpnni-routing-policy command.
Geneva.7.PXM.a > cnfpnni-routing-policy [-sptEpsilon] [-sptHolddown] [-bnPathHolddown]
[-loadBalance] [-onDemand] [-awBgTable] [-ctdBgTable] [-cdvBgTable]
Table 6-3 lists the parameter descriptions for the cnfpnni-routing-policy command.
Table 6-1 Parameters for addpnni-summary-addr Command
Parameter Description
node-index The node index assigned to a PNNI logical node on a network.
Range = 1–65535
address-prefix ATM address prefix assigned to the network.
prefix-length Length of the summary address-prefix in number of bits, equal or less than
152 bits. Currently, the zero-length summary address is not supported.
-type Type of the summary address.
-suppress True = summary address is not advertised.
-state Summary address is advertised | notadvertised | inactive.
Table 6-2 Parameters for cnfpnni-svcc-rcc-timer Command
Parameter Description
nodeIndex Node index.
-initTime Time (in seconds) that the node delays establishment of an SVCC to a
neighbor with a numerically lower ATM address, after determining that such
an SVCC should be established.
-retryTime Time (in seconds) that the node delays before attempting to re-establish an
SVCC-based RCC after the RCC is unexpectedly torn down.
-callingIntegrityTime Time (in seconds) that the node waits for a sent SVCC to become fully
established before giving up and tearing it down.
-calledIntegrityTime Time (in seconds) that the node waits for a received SVCC to become fully
established before giving up and tearing it down.