Specifications

5-6
Cisco MGX 8850 (PXM45) and MGX 8950 Software Configuration Guide
Release 3, Part Number 78-14788-01 Rev. C0, January 2004
Chapter 5 Preparing RPM-PR Cards for Operation
Initializing RPM-PR Cards
The RPM-PR configuration file is named: auto_config_slot. The slot portion of the name must match
the slot number that corresponds to the RPM-PR card.
Note The configuration is also stored in NVRAM using the name startup-config.
Step 11 Exit global configuration mode and save your changes with the copy run start command.
For example,
Router(config)#^Z
Router#copy run start
Building configuration...
[OK]
Router#
This step ensures that your configuration change will not be lost when the router restarts. It also saves
the configuration to the PXM45 hard disk. The following directory listing shows the configuration file
that is saved:
pop20two.7.PXM.a > cd E:RPM
pop20two.7.PXM.a > ll
size date time name
-------- ------ ------ --------
512 NOV-17-2000 20:01:10 . <DIR>
512 NOV-17-2000 20:01:10 .. <DIR>
2334044 DEC-08-2000 02:17:46 rpm-boot-mz.122-4.T
7695500 DEC-08-2000 02:18:52 rpm-js-mz.122-4.T
553 DEC-16-2000 20:40:24 auto_config_slot09
In the file system :
total space : 102400 K bytes
free space : 92334 K bytes
Caution If you do not save the configuration changes, you will have to repeat this procedure.
Step 12 To begin using the new configuration, reset the card from the active PXM45 card. For example:
Router#cc 7
(session redirected)
8850_NY.7.PXM.a > resetcd 9
The card in slot number 9, will be reset. Please confirm action
resetcd: Do you want to proceed (Yes/No)? y
When the dspcds command display shows that the RPM-PR card is active, the initialization is complete.