Specifications

4-5
Cisco MGX 8850 (PXM45) and MGX 8950 Software Configuration Guide
Release 3, Part Number 78-14788-01 Rev. C0, January 2004
Chapter 4 Preparing FRSM12 Cards and Lines for Communication
Managing Firmware Version Levels for FRSM12 Cards
To verify the firmware versions in use on your switch, use the following procedure.
Step 1 To display the software revision status of all the cards in a switch, enter the dsprevs command as follows:
hsfrnd6.8.PXM.a > dsprevs
hsfrnd6 System Rev: 03.00 Feb. 15, 2002 06:19:35 GMT
MGX8850 Node Alarm: NONE
Physical Logical Inserted Cur Sw Boot FW
Slot Slot Card Revision Revision
-------- ------- -------- -------- --------
01 01 --- --- ---
02 02 --- --- ---
03 03 --- --- ---
04 04 FRSM12_12T3E3 3.0(0) 3.0(0)
05 05 --- --- ---
06 06 --- --- ---
07 07 --- --- ---
08 07 PXM45 3.0(0) 3.0(0)
09 09 --- --- ---
10 10 --- --- ---
11 11 FRSM12_12T3E3 3.0(0) 3.0(0)
12 12 --- --- ---
13 13 --- --- ---
14 14 --- --- ---
15 15 --- --- ---
16 15 --- --- ---
Type <CR> to continue, Q<CR> to stop:
Step 2 To see the software revision levels for a single card, enter the dspversion command as follows:
hsfrnd6.4.FRSM12.a > dspversion
Image Type Shelf Type Card Type Version Built On
---------- ---------- ---------- ------------ ------------
Runtime MGX FRSM12 3.0(0) Feb 14 2002, 19:46:30
Boot MGX FRSM12 3.0(0) -
Step 3 Another way to see the software revision levels for a single card is to enter the dspcd command as
follows:
hsfrnd6.4.FRSM12.a > dspcd
Front Card Upper Card Lower Card
---------- ---------- ------------
Card Type: FRSM12_12T3E3 SMB-6-T3 SMB-6-T3
State: Active Present Present
Serial Number: 12345678901 12 10101010101
Boot FW Rev: 3.0.(0) --- ---
SW Rev: 3.0.(0) --- ---
HW Rev: 0.0 0.0 0.0
Orderable Part#: 800-12345-03 800-12345-01 800-00100-23
PCA Part#: 73-5530-02 73-1234-01 73-1111-22
CLEI Code: 000000123 12 1234567890