Specifications

3-5
Cisco MGX 8850 (PXM45) and MGX 8950 Software Configuration Guide
Release 3, Part Number 78-14788-01 Rev. C0, January 2004
Chapter 3 Preparing AXSM Cards and Lines for Communication
Managing Firmware Version Levels for AXSM Cards
Verifying Card Firmware Version Levels
When you are having problems with your switch, or when you have taken delivery of a new switch but
delayed installation, it is wise to verify the firmware versions installed on the switch. If newer versions
of this firmware are available, installing the updated firmware can prevent switch problems.
To verify the firmware versions in use on your switch, use the following procedure.
Step 1 To display the software revision status of all the cards in a switch, enter the dsprevs command as follows:
M8850_LA.7.PXM.a > dsprevs
M8850_LA System Rev: 02.01 Sep. 27, 2001 20:36:15 PST
MGX8850 Node Alarm: NONE
Physical Logical Inserted Cur Sw Boot FW
Slot Slot Card Revision Revision
-------- ------- -------- -------- --------
01 01 AXSM_4OC12 2.1(60) 2.1(60)
02 02 --- --- ---
03 03 AXSM_16T3E3 2.1(60) 2.1(60)
04 04 --- --- ---
05 05 AXSME_2OC12 2.1(60) 2.1(60)
06 06 AXSM_16OC3_B 2.1(60) 2.1(60)
07 07 PXM45 2.1(60) 2.1(60)
08 07 PXM45 2.1(60) 2.1(60)
09 09 RPM_PR --- ---
10 10 --- --- ---
11 11 --- --- ---
12 12 --- --- ---
13 13 --- --- ---
14 14 --- --- ---
Step 2 To see the software revision levels for a single card, enter the dspversion command as follows:
8850_NY.1.AXSM.a > dspversion
Image Type Shelf Type Card Type Version Built On
---------- ---------- ---------- ------------ ------------
Runtime MGX AXSM 2.1(0) Feb 13 2001, 07:47:35
Boot MGX AXSM 2.1(0) -