Specifications

Contents
x
Cisco MGX 8850 (PXM45) and MGX 8950 Software Configuration Guide
Release 3, Part Number 78-14788-01 Rev. C0, January 2004
Clearing Path and ConnectionTraces 7-75
Clear the Connection Trace Buffer 7-76
Clear the Path Trace Buffer 7-76
Clearing a Call at the Destination Node 7-77
Managing Load Sharing 7-77
Displaying Load Sharing Status 7-77
Changing Load Sharing Options 7-78
Starting and Managing Telnet Sessions to Other Switches 7-79
Starting a Telnet Session 7-79
Returning to a Previous Session 7-79
Returning to the Original CLI Session 7-80
Displaying a Telnet Trace 7-80
Verifying PXM45 Disk Data 7-80
Displaying the Contents of the Disk Verification Utility Log File 7-82
Troubleshooting Discrepancies Between the Active and Standby Disk 7-85
Managing Line Loopbacks 7-85
Deleting a Loopack State 7-87
Configuring a line loopback 7-87
Configuring Loopback Line Tests on AXSME Cards 7-88
Configuring a loopback line on Connection 7-89
Configuring a Bit Error Rate Test on an AXSM 7-91
Deleting a Configured Bit Error Rate Test 7-93
Diagnostics Support MGX 8850 and MGX 8950 Switches 7-93
Configuring Offline and Online Diagnostics Tests on the AXSME Card 7-94
Enabling Online and Offline Diagnostics Tests on the All Cards in a Switch 7-96
Displaying Online and Offline Diagnostics Test configuration information 7-97
Displaying online diagnostic errors 7-98
Displaying offline diagnostic errors 7-98
CHAPTER 8 Switch Maintenance Procedures 8-1
Adding Cards 8-1
Adding a Standby PXM45 Card 8-1
Adding AXSM Cards 8-2
Adding RPM Cards 8-4