Specifications

Contents
vii
Cisco MGX 8850 (PXM1E/PXM45), Cisco MGX 8950, Cisco MGX 8830, and Cisco MGX 8880 Configuration Guide
Release 5.0.10, OL-3845-01 Rev. B0, August 16, 2004
Managing Firmware Version Levels for Service Modules 4-3
Locating Cards that Need the Firmware Version Set 4-3
Initializing Service Modules 4-4
Verifying Card Firmware Version Levels 4-5
Selecting MPSM Interfaces and Services 4-6
Establishing Redundancy Between Two Service Modules 4-8
Selecting a Card SCT 4-9
Selecting a Port SCT 4-11
CHAPTER 5 Preparing SRM Cards for Communications 5-1
Configuration Quickstart for Bulk Distribution on SRMs Configured for SONET/SDH 5-2
Configuration Quickstart for Bulk Distribution on SRMs Configured for T3 Interfaces 5-3
Setting Up SRM Lines 5-4
Bringing Up Lines 5-4
Configuring Lines on an SRM Card 5-5
Configuring a SONET/SDH Line 5-5
Configuring T3 Lines 5-8
Establishing Redundancy Between SONET/SDH Lines with APS 5-10
Linking Service Module Lines to SRM Channels, VTs, or VCs 5-13
Where To Go Next 5-19
CHAPTER 6 Preparing RPM Cards for Operation 6-1
Configuration Quickstart 6-1
Locating RPM Cards in the Switch 6-2
Understanding dspcds and dspcd Displays for RPM 6-2
Initializing RPM Cards 6-4
Verifying the Software Version in Use 6-8
Establishing Redundancy Between RPM Cards 6-9
Configuring SNMP on the RPM Card 6-10
Where to Go Next 6-11
CHAPTER 7 Managing Service Class Templates 7-1
Cisco SCTs 7-2
Managing SCTs 7-4
Locating SCT Files on a Switch 7-5
SCT File Naming Convention 7-5
Creating and Modifying SCT Files 7-6