Specifications

E-12
Cisco MGX 8850 (PXM1E/PXM45), Cisco MGX 8950, Cisco MGX 8830, and Cisco MGX 8880 Configuration Guide
Release 5.0.10, OL-3845-01 Rev. B0, August 16, 2004
Appendix E Hardware Survey and Software Configuration Worksheets
AXSM Configuration Worksheet
AXSM Configuration Worksheet
Table E-7 lists general switch parameters you will need to configure on each AXSM card.
Note AXSM cards operate only on Cisco MGX 8850 (PXM45) and Cisco MGX 8950 switches, and on the
Cisco MGX 8880 Media Gateway. The Cisco MGX 8850 (PXM1E/PXM45), Cisco MGX 8950, Cisco
MGX 8830, and Cisco MGX 8880 Hardware Installation Guide, Releases 2 Through 5 describes which
AXSM cards operate in which switches. If you are configuring a Cisco MGX 8850 (PXM1E) or
Cisco MGX 8830 switch, or if you do not have AXSM cards installed in your switch, you do not need
to fill out Table E-7.
Table E-7 General AXSM, AXSM-E, and AXSM-XG Card Configuration Parameters
Feature
Parameter
Information Value to Configure
Slot for this AXSM Slot number
AXSM type AXSM, AXSM/B,
AXSM-E or
AXSM-XG
Software Version Data
Boot software Version number
Runtime software Version number
Card Redundancy Options
Standalone configuration Yes or no?
Redundant configuration
Card role Primary or secondary
Card slot for other
half of redundant
card pair
Slot number
APS connector
installed?
Yes or no?
Card SCT SCT number