Specifications

9-86
Cisco MGX 8850 (PXM1E/PXM45), Cisco MGX 8950, Cisco MGX 8830, and Cisco MGX 8880 Configuration Guide
Release 5.0.10, OL-3845-01 Rev. B0, August 16, 2004
Chapter 9 Switch Operating Procedures
Managing PXM1E and AXSM Card Diagnostics
Example 9-4 Configuring online diagnostics only
In the following example, the user enables online diagnostics only for all cards in the switch.
Unknown.7.PXM.a > cnfdiagall 7 enable disable
Example 9-5 Configuring offline diagnostics only
In the following example, the user enables online diagnostics for all cards in the switch. A medium
online diagnostics coverage test is scheduled to run every Wednesday at 11:30 (11:30 AM).
Unknown.7.PXM.a > cnfdiagall 7 disable enable medium 11:30 -W-
Example 9-6 Configuring both online and offline diagnostics at the same time
In the following example, the user enables both online and offline diagnostics for all cards in the switch.
A medium offline diagnostics coverage test is scheduled to run every Monday and Friday at 21:30 (8:30
PM).
Unknown.7.PXM.a > cnfdiagall 7 enable enable medium 21:30 -M-F-
To display your online diagnostics test configuration and ensure all the parameters have been set
correctly, enter the dspdiagcnf command.
Displaying Online and Offline Diagnostics Test Configuration Information
Enter the dspdiagcnf command to display the current diagnostics configuration on a card. The
dspdiagcnf command displays the following information:
• Slot number
• Whether online diagnostics are enabled or disabled
• Whether offline diagnostics are enabled or disabled
• The type of coverage currently running for offline diagnostics
• The start time for offline diagnostics
• The day(s) of the day on which offline diagnostic tests are scheduled to run.