Specifications

xlv
Cisco MGX 8850 (PXM1E/PXM45), Cisco MGX 8950, Cisco MGX 8830, and Cisco MGX 8880 Configuration Guide
Release 5.0.10, OL-3845-01 Rev. B0, August 16, 2004
About This Guide
Documentation
Chapter 7, “Managing Service Class Templates” This chapter has been completely rewritten. A
master table provide guidance for selecting SCTs,
and the rest of the chapter describes SCT
management and shows display command
examples for PXM1E cards. For display
command examples for service modules, refer to
the appropriate service module guide, all of which
are listed in Table 1-1.
Chapter 8, “Managing PNNI Nodes and PNNI
Routing”
Some sections have been revised, and the
following sections have been added:
• Configuring the Deroute Delay
• Managing Priority Routing
• Managing Priority Bumping
• Managing Connection Grooming
Chapter 9, “Switch Operating Procedures” Some sections have been revised, and the
following sections have been added:
• Managing MPSM Licenses
• Enabling and Disabling Telnet Access
• Displaying the Telnet Enable Status
• Starting and Managing Secure (SSH) Access
Sessions Between Switches
• Managing Remote (TACACS+)
Authentication and Authorization
Note The “Managing Priority Routing” section
was moved to Chapter 8, “Managing
PNNI Nodes and PNNI Routing.”
Chapter 10, “Switch Maintenance Procedures” Revised the PXM and AXSM upgrade procedures
and added the following sections:
• Replacing Eight-Port T1 and E1 Service
Modules with MPSM-8-T1E1
• Replacing SRM Cards with SRME/B
Chapter 11, “Viewing and Responding to Alarms” Minor revisions due to command changes.
Appendix A, “Downloading and Installing
Software Upgrades”
Minor revisions.
Appendix B, “PXM Backup Boot Procedures” Minor revisions.
Appendix C, “Supporting and Using Additional
CLI Access Options”
Added a section called “Starting a Secure (SSH)
CLI Session” and made minor revisions.
Table 4 Changes to This Book Since the Previous Release
Chapter Changes