Specifications

9-53
Cisco MGX 8850 (PXM1E/PXM45), Cisco MGX 8950, Cisco MGX 8830, and Cisco MGX 8880 Configuration Guide
Release 5.0.10, OL-3845-01 Rev. B0, August 16, 2004
Chapter 9 Switch Operating Procedures
Configuring VPI and VCI Ranges for SVCs and SPVCs
Step 4 Enter configure the port range, enter the following command:
mgx8830a.1.PXM.a > cnfpnportrange <portid> [-minsvccvpi <min-svcc-vpi>] [-maxsvccvpi
<max-svcc-vpi>]] [-minsvccvci <min-svcc-vci>] [-maxsvccvci <max-svcc-vci>]] [-minsvpcvpi
<min-svpc-vpi>] [-maxsvpcvpi <max-svpc-vpi>]]
The only required parameter for this command is the <portid> parameter, but the command serves no
purpose if you enter it without options. If you include some options with the command and omit others,
the omitted options remain set to the last configured values. Table 9-25 lists and describes the options
and parameters for this command.
Step 5 Enter the following command to bring up the PNNI port you just configured:
mgx8830a.1.PXM.a > uppnport <portid>
Replace <portid> using the format slot:bay.line:ifNum. Table 9-1 describes these parameters.
Step 6 To display the PNNI port range for a port, enter the following command:
mgx8830a.1.PXM.a > dsppnportrange <portid>
Table 9-25 Parameters for the cnfpnportrange Command
Parameter Description
portid Port identifier in the format slot:bay.line:ifnum. Table 9-1 describes these
parameters.
min-svcc-vpi Minimum VPI value for SVCC.
Range: 0to4095.
Default = 0.
max-svcc-vpi Maximum VPI value for SVCC.
Range: 0to4095.
Default = 4095.
min-svcc-vci Minimum VCI value for SVCC.
Range: 32 to 65535.
Default = 35.
max-svcc-vci Maximum VCI value for SVCC.
Range: 32 to 65535.
Default = 65535.
min-svpc-vpi Minimum VPI value for SVPC.
Range: 1to4095.
Default = 1.
max-svpc-vpi Maximum VPI value for SVPC.
Range: 1to4095.
Default = 4095.