Specifications

8-51
Cisco MGX 8850 (PXM1E/PXM45), Cisco MGX 8950, Cisco MGX 8830, and Cisco MGX 8880 Configuration Guide
Release 5.0.10, OL-3845-01 Rev. B0, August 16, 2004
Chapter 8 Managing PNNI Nodes and PNNI Routing
Displaying Node Configuration Information
The following example shows the report for this command:
mgx8830a.1.PXM.a > dsppnsysaddr
47.0091.8100.0000.0030.ff0f.ef38.0000.010b.180b.00/160
Type: host Port id: 17251106
47.0091.8100.0000.0030.ff0f.ef38.0000.010b.1816.00/160
Type: host Port id: 17251106
47.0091.8100.0000.0030.ff0f.ef38.0000.010b.1820.00/160
Type: host Port id: 17251106
47.0091.8100.0000.0030.ff0f.ef38.0000.010b.1821.00/160
Type: host Port id: 17251106
47.0091.8100.0000.0030.ff0f.ef38.0000.010d.1820.00/160
Type: host Port id: 17251106
47.0091.8100.0000.0030.ff0f.ef38.0000.010d.1821.00/160
Type: host Port id: 17251106
47.0091.8100.0000.0030.ff0f.ef38.0000.010d.1822.00/160
Type: host Port id: 17251106
47.0091.8100.0000.0030.ff0f.ef38.0000.010d.180b.00/160
Type: host Port id: 17251106
47.0091.8100.0000.0030.ff0f.ef38.0030.ff0f.ef38.01/160
Type: host Port id: 17251106
47.0091.8100.0000.0030.ff0f.ef38.0030.ff0f.ef38.99/160
Type: host Port id: 17251106
47.0091.8100.0000.0030.ff0f.ef38.1111.1101.0001.01/160
Type: host Port id: 17251106
47.0091.8100.0000.0050.0fff.e0b8/104
Type: static Port id: 17635339
39.6666.6666.6666.6666.6666.6666.6666.6666.6666/152
Type: uni Port id: 17504267
mgx8830a.1.PXM.a >
Displaying PNNI Interface Parameters
Enter the dsppnni-intf command to display the service category-based administrative weight and
aggregation token parameters:
mgx8830a.1.PXM.a > dsppnni-intf [node-index] [port-id]
The following example shows the report for this command:
mgx8830a.1.PXM.a > dsppnni-intf 11:2.2:22
Physical port id: 11: 2.2:22 Logical port id: 17504278
Aggr token.......... 0 AW-NRTVBR........... 5040
AW-CBR.............. 5040 AW-ABR.............. 5040
AW-RTVBR............ 5040 AW-UBR.............. 5040
mgx8830a.1.PXM.a >
Table 8-17 describes the objects displayed for the dsppnni-intf command.