User guide

6-6
Cisco Media Gateway Manager for the Cisco MGX 8260 Media Gateway User Guide
Release 1.0, Part Number 78-11705-01, December 2000
Chapter 6 Fault and Performance Management
Registering Cisco MGX 8260 Traps
You register traps using the Cisco WebViewer. The following table summarizes the Cisco WebViewer
procedures for trap registration and community string configuration. for more information, see the
“Cisco MGM Community String Configuration” section on page 4-4.
The Cisco MGX 8260 Media Gateway supports the following trap categories:
The Cisco WebViewer displays the entire list of traps on the configuration forms.
Ta b l e 6 - 3 Tr a p R e g i s t r a t i o n M a p
Configuration Task Navigation Tree Selection Screen Screen Link
Trap configuration Node>SNMP>Trap
Registration
Trap Registration + to add
i to change
- to delete
Community string configuration Node>SNMP>Community
String
Community String + to add
- to delete
Ta b l e 6 - 4 Tr a p C a t e g o r i e s
Bit Trap Description
0 Severity Major (trap severity selection)
1 Severity Minor (trap severity selection)
2 Severity Information (trap severity selection)
3 1000 to 1099 Shelf
4 1100 to 1199 Card
5 1200 to 1299 SNMP
6 1300 to 1399 Dsx1 Line
7 1400 to 1499 Dsx3 Line
8 1500 to 1599 Sonet Line
9 1600 to 1699 Ether Line
10 1700 to 1799 Voice Port
11 – Ether Channel
12 – Voice Channel
13 1800 to 1899 EMM
14 1900 to 1999 Clock
15 2000 to 2099 DSP
16 2100 to 2199 DMCMAP
17 2200 to 2299 ISDN
18 2300 to 2399 MGCP
19 2400 to 2499 Backhaul Session