User guide

4-6
Cisco Media Gateway Manager for the Cisco MGX 8260 Media Gateway User Guide
Release 1.0, Part Number 78-11705-01, December 2000
Chapter 4 Security Management
Cisco MGM Community String Configuration
To configure Cisco MGM community strings, follow these steps:
Step 1 Log onto Cisco MGM.
Step 2 On the Cisco EMF Launchpad, click Viewer. The Cisco EMF MapViewer opens.
Step 3 Expand the object tree and right-click on the desired site or object; then click Open SNMP Community
String Configuration Dialog.
The SNMP Community String Config dialog box opens (see Figure 4-4).
Figure 4-4 SNMP Community String Dialog Box
Note For security reasons, the form does not display the current community string values.
Step 4 Select one or more IP addresses from the list, using the Shift key to select multiple addresses.
Step 5 Type a read-only community string in the Read Only Community String field.
Step 6 Type a read-write community string in the Read Write Community String field.
Step 7 Click Modify Community Strings.
Note Cisco EMF 3.1 scrambles the community strings, so you can not view them later.