User guide

3-7
Cisco Media Gateway Manager for the Cisco MGX 8260 Media Gateway User Guide
Release 1.0, Part Number 78-11705-01, December 2000
Chapter 3 Using the Management Interfaces
Cisco WebViewer Sessions
The table below shows the icons used to launch line configuration tasks:
The first six icons in Table 3-1 are displayed in the Select column for each line on the line configuration
forms. Click on the desired icon to perform the specified line configuration task.
Along the top of the line configuration forms is another row of icons, some of which are active buttons.
Use the + and - icons in this group to add or delete lines. The rest of these icons are legends for the icons
in the Select column.
Configuration Forms
Use configuration forms to define the parameters for a given card or service. Figure 3-6 shows an
example of a card configuration form.
Figure 3-6 Card Configuration Screen
Table 3-1 Icons Used On Line Configuration Screens
Icon Task
- Delete one or more lines.
i Display alarm and configuration information.
C Display error counters and performance alarms.
A Set the performance alarm thresholds.
P Display performance statistics or SONET path information.
S Display DS0 details or SONET section information.
L Display DS1 details or SONET line information.
+ Add a line.
R Reset a card.