User guide

3-4
Cisco Media Gateway Manager for the Cisco MGX 8260 Media Gateway User Guide
Release 1.0, Part Number 78-11705-01, December 2000
Chapter 3 Using the Management Interfaces
Cisco WebViewer Sessions
Quitting a Cisco EMF User Session
Step 1 From the File menu, select Quit or press Ctrl + Q or click the Close icon from the Toolbar.
Step 2 A dialog box asking, Do you wish to quit the CEMF Manager System? is displayed. Click Yes to quit
the session.
All active applications are closed, and the session terminates.
Cisco WebViewer Sessions
Before you can configure the Cisco MGX 8260 Media Gateway, you must log on as a user with the
privileges necessary to change system parameters. You need SuperUser privileges to change most
system-level settings.
Starting a Cisco WebViewer Session
This section explains how to log on and use Cisco WebViewer to manage Cisco MGX 8260 Media
Gateway chassis and subchassis components.
To log on, follow these steps:
Step 1 On the MapViewer, right-click the desired MGX 8260 chassis; then click Tools; then click Launch Web
Viewer.
The WebViewer login screen opens.
Step 2 In the User Name field, type the name of a valid MGX 8260 account name. On a new system, use
SuperUser.
Step 3 In the Password field, type the account password. On a new system, use cisco or the new password you
assigned to this account.
Step 4 Click Log On. Grant requests for additional privileges, if necessary.