Troubleshooting guide

3-35
Cisco PGW 2200 Softswitch Release 9.8 Operations, Maintenance, and Troubleshooting Guide
OL-0800-14
Chapter 3 Cisco PGW 2200 Softswitch Platform Operations
Periodic Maintenance Procedures
Step 2 Enter 2 to remove an automatic backup operation from the schedule.
The system returns a response like the following:
Delete a Scheduled Backup
-------------------------
NameRetriesTimeoutDayTimeDirectory
Back15 60 everyday12:00/var/cisco
Mybackup030 weekdays04:00/var/cisco
Enter the name of the backup to be deleted:
Step 3 Enter the name of the automatic backup operation to remove from the schedule.
The system returns a response like the following:
Delete this scheduled backup (Y or N)?
Step 4 Enter Y to delete an automatic backup operation, or enter N if you do not want to delete an automatic
backup operation.
Note Press Ctrl-C at any time to halt the execution of the mgcbackup script.
The system returns a response like the following:
Scheduled backup name deleted.
Press enter to continue:
Where name is the name of the deleted scheduled backup, as specified in Step 3.
Step 5 Press Enter to return to the backup schedule menu. You can either exit the utility or schedule another
backup activity.
Removing all Automatic Backup Operations from the Schedule
To remove all of the automatic backup operations from the schedule, perform the following steps:
Step 1 Enter the following UNIX command on the Cisco PGW 2200 Softswitch:
mgcbackup -s
The system returns a response like the following:
Backup Schedule Menu
--------------------
1. Add a scheduled backup
2. Delete a scheduled backup
3. Delete all scheduled backups
4. List scheduled backups
5. Exit
Selection: