Troubleshooting guide

3-33
Cisco PGW 2200 Softswitch Release 9.8 Operations, Maintenance, and Troubleshooting Guide
OL-0800-14
Chapter 3 Cisco PGW 2200 Softswitch Platform Operations
Periodic Maintenance Procedures
After you enter your directory path, the system returns a response like the following:
Enter the number of retries (default=0):
Step 5 Enter the number of times to check for an active provisioning session on the Cisco PGW 2200 Softswitch
before aborting the backup operation.
Note A backup operation cannot start while a provisioning session is active on the Cisco PGW 2200
Softswitch.
Note The maximum number of retries is 100.
After you enter the number of retries, the system returns a response like the following:
Enter the time between retries (default=30 seconds):
Step 6 Enter the number of seconds to wait between checks for an active provisioning session on the Cisco
PGW 2200 Softswitch.
Note The maximum number of seconds between checks is 3600.
After you enter the time between attempts, the system returns a response like the following:
Enter the day of the week (default=everyday):
Step 7 Enter the day or days of the week on which you would like the backup operation performed. The
following values are valid:
• SUNDAY
• MONDAY
• TUESDAY
• WEDNESDAY
• THURSDAY
• FRIDAY
• SATURDAY
• WEEKDAYS
• WEEKENDS
• EVERYDAY
After you enter the day or days of the week setting, the system returns a response like the following:
Enter the time (HH:MM):
Step 8 Enter the time at which you want to start the automatic backup operation, in hour:minute format.
Note The range for hour is from 00 to 23, and the range for minute is from 0 to 59.