Troubleshooting guide

3-13
Cisco PGW 2200 Softswitch Release 9.8 Operations, Maintenance, and Troubleshooting Guide
OL-0800-14
Chapter 3 Cisco PGW 2200 Softswitch Platform Operations
Daily Tasks
Understanding the SS7 Route State Information
The following sections describe the information that is returned by the system when you enter the
rtrv-rte command, as shown in the following example:
"ss7srv1:linkset1,APC=apc-1,OPC=opc-1,PRIO=1,PST=IS,SST=NA"
"ss7srv1:linkset2,APC=apc-2,OPC=opc-1,PRIO=1,PST=IS,SST=NA"
"ss7srv2:linkset1,APC=apc-3,OPC=opc-2,PRIO=1,PST=IS,SST=NA"
"ss7srv2:linkset2,APC=apc-3,OPC=opc-2,PRIO=1,PST=IS,SST=NA"
Signaling Service
The first field lists the MML name for the signaling services that are associated with the SS7 route. In
the example, the signaling services are ss7srv1 and ss7srv2.
Linkset
The second field lists the MML name for the linksets that are associated with the SS7 route. In the
example, the linksets are linkset1 and linkset 2.
Adjacent Point Code
The APC field lists the MML name for the adjacent point code (APC) associated with the SS7 route. In
the example, there are APCs:
• apc-1
• apc-2
• apc-3
• apc-4
Originating Point Code
The OPC field lists the MML name for the originating point code (OPC) associated with the SS7 route.
In the example, there are OPCs:
• opc-1
• opc-2
• opc-3
• opc-4
Priority
The PRIO field lists the priority that is provisioned for this SS7 route. In the example, all of the SS7
routes have a priority of 1.