Troubleshooting guide

A-6
Cisco PGW 2200 Softswitch Release 9.8 Operations, Maintenance, and Troubleshooting Guide
OL-0800-14
Appendix A Configuring Cisco PGW 2200 Softswitch Log Files
Configuring the Data Dumper
A comma separates each field. Table A-3 describes the content of each field.
The following sample shows the content of an archived measurement file:
0,1012013100,900,0,"messages","SP: cInit out","ss7svc11"
0,1012013100,900,0,"occurrances","ACC: CALL REJ","hcss3-118"
0,1012013100,900,0,"occurrances","ACC: CALL REJ","hcss3-119"
0,1012013100,900,0,"messages","SP: cInit out","ss7svc5"
0,1012013100,900,0,"messages","SP: cInit out","ss7svc8"
0,1012013100,900,0,"messages","SP: cInit out","ss7svc9"
0,1012013100,900,0,"messages","SP: cInit out","ss7svc10"
0,1012013100,900,0,"occurrances","ACC: CALL REJ","hcss4-2"
0,1012013100,900,0,"occurrances","ACC: CALL REJ","tg-4166"
0,1012013100,900,0,"occurrances","ACC: CALL REJ","hcss4-3"
0,1012013100,900,0,"occurrances","ACC: CALL REJ","tg-4165"
0,1012013100,900,0,"occurrances","ACC: CALL REJ","hcss4-4"
0,1012013100,900,0,"occurrances","ACC: CALL REJ","hcss4-5"
0,1012013100,900,0,"occurrances","ACC: CALL REJ","tg-4164"
0,1012013100,900,0,"occurrances","ACC: CALL REJ","tg-4162"
0,1012013100,900,0,"occurrances","ACC: CALL REJ","hcss4-6"
0,1012013100,900,0,"occurrances","ACC: CALL REJ","tg-4163"
0,1012013100,900,0,"occurrances","ACC: CALL REJ","hcss4-7"
0,1012013100,900,0,"occurrances","ACC: CALL REJ","hcss4-8"
0,1012013100,900,0,"occurrances","ACC: CALL REJ","hcss4-9"
0,1012013100,900,0,"occurrances","ACC: CALL REJ","hcss4-10"
0,1012013100,900,0,"occurrances","ACC: CALL REJ","hcss4-11"
Table A-3 Archived Alarm File Fields
Field Name Data Type
Maximum
Length Comments
Release level Integer 3 Format of records (should be set to 0).
Timestamp
(seconds)
Integer 10 Indicates the time, in seconds, since the start of the
UNIX internal timer, time of epoch.
Timestamp
(milliseconds)
Integer 5 Indicates the time, in milliseconds, since the start of
the UNIX internal timer, time of epoch.
State Integer 1 Used for informational alarms, either 0 for reset or 1
for set.
Severity Integer 1 Indicates the severity of the alarm. There are four
severity levels:
• 0—Informational
• 1—Minor
• 2—Major
• 3—Critical
Alarm category String 80 Text that describes the nature of the alarm. For a list
and description of the available alarms, see
Cisco PGW 2200 Softswitch Release 9 Messages
Reference.
Component name String 32 Identifies the component that is associated with the
alarm. For more information on components, see
Cisco PGW 2200 Softswitch Release 9.8 Provisioning
Guide.
Originator String 32 Identifies the service that set or cleared this alarm.