Troubleshooting guide

6-194
Cisco PGW 2200 Softswitch Release 9.8 Operations, Maintenance, and Troubleshooting Guide
OL-0800-14
Chapter 6 Troubleshooting the Cisco PGW 2200 Softswitch Platform
Platform Troubleshooting
Step 33 Enter y (yes) again and press Enter.
The system displays text like the following:
mgcusr on <BAMS> successfully configured
Do you want to configure second interface for <BAMS>? n
Step 34 You can answer either y (yes) or n (no):
• Yes (configuring a second interface) is optional. If you answer y, repeat Step 1 through Step 19.
• If you answer no, proceed to Step 21.
Step 35 Repeat Step 15 through Step 19 for additional Cisco PGW 2200 Softswitch nodes.
The system displays text like the following:
mgcusr on <BAMS1> successfully configured
Do you want to configure second interface for <BAMS1>? n
Step 36 Enter n (no) and press Enter.
The system displays text like the following:
Please enter a PGW or BAMS host name, or q to quit
Enter a host name now:
Step 37 Continuing on the active Cisco BAMS, enter the standby Cisco BAMS unit information (Cisco BAMS
name, Cisco BAMS login password).
Step 38 When all the Cisco BAMS interfaces are configured, type q to quit and press Enter.
The system displays text like the following:
Done
Step 39 Go to the active Cisco PGW 2200 Softswitch (Host A) in the “Securing the Cisco PGW 2200 Softswitch”
section on page 6-187 and repeat Step 1 and Step 2.
The system displays text like the following:
-rw-rw-r-- 1 mgcusr mgcgrp 182 Feb 12 14:29 cdr_20030212142403_037281.finished
-rw-rw-r-- 1 mgcusr mgcgrp 182 Feb 12 14:34 cdr_20030212142903_037282.finished
-rw-rw-r-- 1 mgcusr mgcgrp 182 Feb 12 14:39 cdr_20030212143403_037283.finished
-rw-rw-r-- 1 mgcusr mgcgrp 182 Feb 12 14:44 cdr_20030212143903_037284.finished
-rw-rw-r-- 1 mgcusr mgcgrp 182 Feb 12 14:49 cdr_20030212144403_037285.finished
-rw-rw-r-- 1 mgcusr mgcgrp 182 Feb 12 14:54 cdr_20030212144903_037286.finished
-rw-rw-r-- 1 mgcusr mgcgrp 182 Feb 12 14:59 cdr_20030212145403_037287.finished
-rw-rw-r-- 1 mgcusr mgcgrp 182 Feb 12 15:04 cdr_20030212145903_037288.finished
-rw-rw-r-- 1 mgcusr mgcgrp 182 Feb 12 15:09 cdr_20030212150403_037289.finished
-rw-rw-r-- 1 mgcusr mgcgrp 182 Feb 12 15:14 cdr_20030212150903_037290.finished
-rw-rw-r-- 1 mgcusr mgcgrp 182 Feb 12 15:19 cdr_20030212151403_037291.bin
-rw-rw-r-- 1 mgcusr mgcgrp 182 Feb 12 15:24 cdr_20030212151904_037292.bin
-rw-rw-r-- 1 mgcusr mgcgrp 182 Feb 12 15:30 cdr_20030212152434_037293.bin
-rw-rw-r-- 1 mgcusr mgcgrp 182 Feb 12 15:35 cdr_20030212153004_037294.bin
-rw-rw-r-- 1 mgcusr mgcgrp 182 Feb 12 15:40 cdr_20030212153504_037295.bin
-rw-rw-r-- 1 mgcusr mgcgrp 182 Feb 12 15:45 cdr_20030212154004_037296.bin
-rw-rw-r-- 1 mgcusr mgcgrp 182 Feb 12 15:50 cdr_20030212154504_037297.bin
-rw-rw-r-- 1 mgcusr mgcgrp 182 Feb 12 15:55 cdr_20030212155004_037298.bin
Step 40 Ensure that the CDR file number you noted in Step 3 has changed from .bin to .finished.