Troubleshooting guide

6-193
Cisco PGW 2200 Softswitch Release 9.8 Operations, Maintenance, and Troubleshooting Guide
OL-0800-14
Chapter 6 Troubleshooting the Cisco PGW 2200 Softswitch Platform
Platform Troubleshooting
Step 28 Enter y to continue and press Enter.
The system displays text like the following:
Sun Microsystems Inc. SunOS 5.6 Generic August 1997
Warning:
Before running this script, SSH must be installed on all PGW and BAMS hosts.
This script will reset the existing known hostkeys
and user keys for bams user for each host entered during this session.
You need to run this script every time the PGW or BAMS is re-installed.
You also need to run this script if SSH is re-installed on PGW or BAMS.
Do you want to continue [y/n]:
Step 29 Enter y (yes) to continue and press Enter.
The system displays text like the following:
Generating security keys, this will take a couple of minutes...
Generating public/private rsa key pair.
Your identification has been saved in /opt/CiscoBAMS/local/.ssh/id_rsa.
Your public key has been saved in /opt/CiscoBAMS/local/.ssh/id_rsa.pub.
The key fingerprint is:
32:8e:10:10:98:2a:35:8a:18:bb:e6:3e:a1:54:d9:27 bams@va-pine
Generating public/private dsa key pair.
Your identification has been saved in /opt/CiscoBAMS/local/.ssh/id_dsa.
Your public key has been saved in /opt/CiscoBAMS/local/.ssh/id_dsa.pub.
The key fingerprint is:
32:dd:2d:51:e3:b4:9b:41:29:49:1a:f2:49:6f:e4:29 bams@va-pine
You will be prompted for the user name and password for each PGW
or BAMS host.
Please remember to enter both PGW host names for a failover pair.
You also need to enter the other BAMS host if this is a redundant setup.
Please enter a PGW or BAMS host name, or q to quit
Enter a host name now:
Step 30 Enter hostname PGW1 and press Enter.
The system displays text like the following:
Please enter a PGW or BAMS host name, or q to quit
Enter a host name now:
Step 31 Enter the hostname mgcusr (the login name of PGW1) and press Enter.
The system displays text like the following:
Are you sure you want to continue connecting (yes/no)? yes
Step 32 Enter y (yes) and press Enter.
The system displays text like the following:
mgcusr@< hostname> ’s password:
id_dsa.pub 100% |*****************************| 602 00:00
Type the password and press Enter.
The system displays text like the following:
mgcusr@<BAMS 1>'s password: