Troubleshooting guide

6-191
Cisco PGW 2200 Softswitch Release 9.8 Operations, Maintenance, and Troubleshooting Guide
OL-0800-14
Chapter 6 Troubleshooting the Cisco PGW 2200 Softswitch Platform
Platform Troubleshooting
Step 14 Enter y (yes) to continue and press Enter.
The system displays text like the following:
Generating security keys, this will take a couple of minutes...
Generating public/private rsa key pair.
Your identification has been saved in /opt/CiscoBAMS/local/.ssh/id_rsa.
Your public key has been saved in /opt/CiscoBAMS/local/.ssh/id_rsa.pub.
The key fingerprint is:
32:8e:10:10:98:2a:35:8a:18:bb:e6:3e:a1:54:d9:27 bams@va-pine
Generating public/private dsa key pair.
Your identification has been saved in /opt/CiscoBAMS/local/.ssh/id_dsa.
Your public key has been saved in /opt/CiscoBAMS/local/.ssh/id_dsa.pub.
The key fingerprint is:
32:dd:2d:51:e3:b4:9b:41:29:49:1a:f2:49:6f:e4:29 bams@va-pine
You will be prompted for the user name and password for each PGW
or BAMS host.
Please remember to enter both PGW host names for a failover pair.
You also need to enter the other BAMS host if this is a redundant setup.
Please enter a PGW or BAMS host name, or q to quit
Enter a host name now:
Step 15 Enter hostname PGW1 and press Enter.
The system displays text like the following:
Please enter a PGW or BAMS host name, or q to quit
Enter a host name now:
Step 16 Enter the hostname mgcusr (the login name of PGW1) and press Enter.
The system displays text like the following:
Are you sure you want to continue connecting (yes/no)? yes
Step 17 Enter y (yes) and press Enter.
The system displays text like the following:
mgcusr@ <hostname> 's password:
id_dsa.pub 100% |*****************************| 602 00:00
Step 18 Enter the password and press Enter.
The system displays text like the following:
mgcusr@<BAMS 1>'s password:
Step 19 Enter y (yes) again and press Enter.
The system displays text like the following:
mgcusr on <BAMS> successfully configured
Do you want to configure second interface for <BAMS>? n
Step 20 You can answer either y (yes) or n (no):
• Yes (configuring a second interface) is optional. If you answer y, repeat Step 1 through Step 19.
• If you answer no, proceed to Step 21.