Troubleshooting guide

3-135
Cisco PGW 2200 Softswitch Release 9.8 Operations, Maintenance, and Troubleshooting Guide
OL-0800-14
Chapter 3 Cisco PGW 2200 Softswitch Platform Operations
Regular Operations
Note The translation verification viewer does not simulate the screening database and cause analysis dial plan
functions.
You can exit the translation verification viewer by choosing File > Exit.
Verifying a Dial Plan Translation
Complete the following steps to verify a dial plan translation:
Step 1 To open the translation verification viewer, click Translation Verification on the Cisco MGC toolbar.
A popup window displays. The popup window warns you that running this tool can affect system
performance and asks if you want to launch the tool. Click Yes. The Translation Verification Viewer
window loads and displays the DialPlan Translation tab window by default (Figure 3-11).
Step 2 Enter the incoming trunk group number for your simulated call in the trunk group number field.
Step 3 Specify an ISDN preference for the selection of an outgoing trunk by choosing a value from the
message-specific ISDN preference drop-down list. The following values are valid for this field:
• ISDN_NOT_REQUIRED (default value)
• ISDN_PREFERRED
• ISDN_REQUIRED
Step 4 Specify the Nature Of Address (NOA) setting for the called party by choosing a value from the called
party Nature of Address drop-down list. The following values are valid for this list:
• NOA_NATIONAL (default value)
• NOA_NONE
• NOA_UNKNOWN
• NOA_SUBSCRIBER
• NOA_INTERNATIONAL
• NOA_NETWORK
• NOA_MERIDIAN
• NOA_ABBR
• NOA_UNIQUE_3DIG_NATL_NUM
• NOA_ANI
• NOA_NO_ANI_RECD
• NOA_NON_UNIQUE_SUBSCRIBER
• NOA_NON_UNIQUE_NATIONAL
• NOA_NON_UNIQUE_INTERNATIONAL
• NOA_OPRREQ_TREATED
• NOA_OPRREQ_SUBSCRIBER
• NOA_OPRREQ_NATIONAL
• NOA_OPRREQ_INTERNATIONAL
• NOA_OPRREQ_NO_NUM