Troubleshooting guide

3-108
Cisco PGW 2200 Softswitch Release 9.8 Operations, Maintenance, and Troubleshooting Guide
OL-0800-14
Chapter 3 Cisco PGW 2200 Softswitch Platform Operations
Regular Operations
"ls1link2:CAT=\"SC: XMIT FRM TOT\",INT=3600,VAL=0"
"ls1link2:CAT=\"SC: XMIT FRM TOT\",INT=86400,VAL=0"
"ls1link2:CAT=\"SC: RCV BAD TOT\",INT=900,VAL=0"
"ls1link2:CAT=\"SC: RCV BAD TOT\",INT=3600,VAL=0"
"ls1link2:CAT=\"SC: RCV BAD TOT\",INT=86400,VAL=0"
"ls2link1:CAT=\"SC: RCV FRM TOT\",INT=900,VAL=0"
"ls2link1:CAT=\"SC: RCV FRM TOT\",INT=3600,VAL=0"
"ls2link1:CAT=\"SC: RCV FRM TOT\",INT=86400,VAL=0"
"ls2link1:CAT=\"SC: XMIT FRM TOT\",INT=900,VAL=0"
"ls2link1:CAT=\"SC: XMIT FRM TOT\",INT=3600,VAL=0"
"ls2link1:CAT=\"SC: XMIT FRM TOT\",INT=86400,VAL=0"
"ls2link1:CAT=\"C7LNK: RCV SU ERR\",INT=1800,VAL=0"
"ls2link2:CAT=\"SC: RCV FRM TOT\",INT=900,VAL=0"
"ls2link2:CAT=\"SC: RCV FRM TOT\",INT=3600,VAL=0"
"ls2link2:CAT=\"SC: RCV FRM TOT\",INT=86400,VAL=0"
"ls2link2:CAT=\"SC: XMIT FRM TOT\",INT=900,VAL=0"
"ls2link2:CAT=\"SC: XMIT FRM TOT\",INT=3600,VAL=0"
"ls2link2:CAT=\"SC: XMIT FRM TOT\",INT=86400,VAL=0"
"ls2link2:CAT=\"SC: RCV BAD TOT\",INT=900,VAL=0"
"ls2link2:CAT=\"SC: RCV BAD TOT\",INT=3600,VAL=0"
Retrieving SS7 Signaling Point Measurements
You can use the rtrv-sp-ctr MML command to retrieve the system measurements for a single SS7
signaling point or for all SS7 signaling points. For a complete list of system measurements, see
Appendix D, “Cisco PGW 2200 Softswitch Measurements.”
To retrieve a list of system measurements for a single SS7 signaling point, log in to the active
Cisco PGW 2200 Softswitch, start an MML session, and enter the rtrv-sp-ctr:point_code command:
Where:
point_code is the MML name of the SS7 signaling point.
For example, to view the measurements for a point code that is called dpc2, enter the rtrv-sp-ctr:dpc2
command:
The system returns a response like the following:
MGC-02 - Media Gateway Controller 2001-06-13 14:08:39
M RTRV
"dpc2:CAT=\"ISUP: XMIT BLA TOT\",INT=300,VAL=0"
"dpc2:CAT=\"ISUP: XMIT BLA TOT\",INT=1800,VAL=0"
"dpc2:CAT=\"ISUP: CHAN MATE UNAVAILABLE\",INT=300,VAL=0"
"dpc2:CAT=\"ISUP: CHAN MATE UNAVAILABLE\",INT=1800,VAL=0"
"dpc2:CAT=\"SP: cInit out\",INT=900,VAL=0"
"dpc2:CAT=\"SP: cInit out\",INT=3600,VAL=0"
"dpc2:CAT=\"SP: cInit out\",INT=86400,VAL=8"
"dpc2:CAT=\"SP: PDU in\",INT=900,VAL=0"
"dpc2:CAT=\"SP: PDU in\",INT=3600,VAL=0"
"dpc2:CAT=\"SP: PDU in\",INT=86400,VAL=50"
"dpc2:CAT=\"ISUP: XMIT CGB TOT\",INT=300,VAL=0"
"dpc2:CAT=\"ISUP: XMIT CGB TOT\",INT=1800,VAL=0"
"dpc2:CAT=\"ISUP: RCV BLA TOT\",INT=300,VAL=0"
"dpc2:CAT=\"ISUP: RCV BLA TOT\",INT=1800,VAL=0"
"dpc2:CAT=\"ISUP: XMIT CQR TOT\",INT=300,VAL=0"
"dpc2:CAT=\"ISUP: XMIT CQR TOT\",INT=1800,VAL=0"
"dpc2:CAT=\"ISUP: RCV CQM TOT\",INT=300,VAL=0"
"dpc2:CAT=\"ISUP: RCV CQM TOT\",INT=1800,VAL=0"
"dpc2:CAT=\"ISUP: XMIT CVR TOT\",INT=300,VAL=0"
"dpc2:CAT=\"ISUP: XMIT CVR TOT\",INT=1800,VAL=0"
"dpc2:CAT=\"ISUP: RCV LPA TOT\",INT=300,VAL=0"