Manualshelf

Troubleshooting guide

ManualsBrandsCisco ManualsComputer equipmentMGX 8260
141142143144145146147148149150
3-107
Cisco PGW 2200 Softswitch Release 9.8 Operations, Maintenance, and Troubleshooting Guide
OL-0800-14
Chapter 3 Cisco PGW 2200 Softswitch Platform Operations
Regular Operations
To retrieve a list of system measurements for the links that make up a linkset, log in to the active
Cisco PGW 2200 Softswitch, start an MML session, and enter the rtrv-lnk-ctr:linkset command:
Where:
linkset is the MML name of the SS7 linkset.
For example, to view the measurements for each link within a linkset that is called ls1, you would enter
the rtrv-lnk-ctr:ls1link1 command:
The system returns a response like the following:
MGC-03 - Media Gateway Controller 2000-08-22 16:32:23
M RTRV
"ls1link1:CAT=\"SC: RCV FRM TOT\",INT=900,VAL=0"
"ls1link1:CAT=\"SC: RCV FRM TOT\",INT=3600,VAL=0"
"ls1link1:CAT=\"SC: RCV FRM TOT\",INT=86400,VAL=0"
"ls1link1:CAT=\"SC: XMIT FRM TOT\",INT=900,VAL=0"
"ls1link1:CAT=\"SC: XMIT FRM TOT\",INT=3600,VAL=0"
"ls1link1:CAT=\"SC: XMIT FRM TOT\",INT=86400,VAL=0"
"ls1link1:CAT=\"SC: RCV BAD TOT\",INT=900,VAL=0"
"ls1link1:CAT=\"SC: RCV BAD TOT\",INT=3600,VAL=0"
"ls1link1:CAT=\"SC: RCV BAD TOT\",INT=86400,VAL=0"
"ls1link1:CAT=\"C7LNK: MSU DROP-CONG\",INT=1800,VAL=0"
"ls1link1:CAT=\"C7LNK: DUR UNAVAIL\",INT=1800,VAL=0"
"ls1link1:CAT=\"SC: RCV BAD CRC\",INT=900,VAL=0"
"ls1link1:CAT=\"SC: RCV BAD CRC\",INT=3600,VAL=0"
"ls1link1:CAT=\"SC: RCV BAD CRC\",INT=86400,VAL=0"
"ls1link1:CAT=\"C7LNK: DUR IS\",INT=1800,VAL=0"
"ls1link1:CAT=\"C7LNK: RCV SIO TOT\",INT=1800,VAL=0"
"ls1link1:CAT=\"C7LNK: XMIT SIO TOT\",INT=1800,VAL=0"
"ls1link1:CAT=\"C7LNK: RCV SU ERR\",INT=1800,VAL=0"
"ls1link2:CAT=\"SC: RCV FRM TOT\",INT=900,VAL=0"
"ls1link2:CAT=\"SC: RCV FRM TOT\",INT=3600,VAL=0"
"ls1link2:CAT=\"SC: RCV FRM TOT\",INT=86400,VAL=0"
"ls1link2:CAT=\"SC: XMIT FRM TOT\",INT=900,VAL=0"
"ls1link2:CAT=\"SC: XMIT FRM TOT\",INT=3600,VAL=0"
"ls1link2:CAT=\"SC: XMIT FRM TOT\",INT=86400,VAL=0"
"ls1link2:CAT=\"SC: RCV BAD TOT\",INT=900,VAL=0"
"ls1link2:CAT=\"SC: RCV BAD TOT\",INT=3600,VAL=0"
"ls1link2:CAT=\"SC: RCV BAD TOT\",INT=86400,VAL=0"
"ls1link2:CAT=\"C7LNK: MSU DROP-CONG\",INT=1800,VAL=0"
"ls1link2:CAT=\"C7LNK: DUR UNAVAIL\",INT=1800,VAL=0"
"ls1link2:CAT=\"SC: RCV BAD CRC\",INT=900,VAL=0"
"ls1link2:CAT=\"SC: RCV BAD CRC\",INT=3600,VAL=0"
"ls1link2 CAT=\"SC: RCV BAD CRC\",INT=86400,VAL=0"
"ls1link2:CAT=\"C7LNK: DUR IS\",INT=1800,VAL=0"
"ls1link2:CAT=\"C7LNK: RCV SIO TOT\",INT=1800,VAL=0"
"ls1link2:CAT=\"C7LNK: XMIT SIO TOT\",INT=1800,VAL=0"
"ls1link2:CAT=\"C7LNK: RCV SU ERR\",INT=1800,VAL=0"
To retrieve a list of system measurements for all the links on your Cisco PGW 2200 Softswitch, log in
to the active Cisco PGW 2200 Softswitch, start an MML session, and enter the rtrv-lnk-ctr:all
command:
The system returns a response like the following:
MGC-03 - Media Gateway Controller 2000-08-22 16:32:23
M RTRV
"ls1link1:CAT=\"SC: RCV FRM TOT\",INT=900,VAL=0"
"ls1link2:CAT=\"SC: RCV FRM TOT\",INT=900,VAL=0"
"ls1link2:CAT=\"SC: RCV FRM TOT\",INT=3600,VAL=0"
"ls1link2:CAT=\"SC: RCV FRM TOT\",INT=86400,VAL=0"
"ls1link2:CAT=\"SC: XMIT FRM TOT\",INT=900,VAL=0"