Specifications

4-31
Cisco MGX 8260 Command Line Interface Guide
Release 1.2, Part Number 78-10987-01 Rev. B0, January, 2002
Chapter 4 Service Management
About the Announcement Service
Viewing Calls by Transaction
To view call information for a specific transaction, enter the lsact command. The system displays
detailed information for the call:
=======================================================================
Active Call Entry (lsact)
=======================================================================
TransactionID
CallID
Source Slot number
Source Line number
Source Ds0
Source Logical Port number
Destination Slot number
Destination Line number
Destination Ds0
Destination Logical Port number
Number packets transmitted
Number packets received
Number packets dropped
Number of bytes transmitted
Number of bytes received
Number of bytes dropped
Call Type: (voip/tdm)
To view all active calls by transaction, enter the lsacts command. The system displays summary
information for active calls:
=======================================================================
Active Call Entries (lsacts) based on Transaction
=======================================================================
Xtrn Src Slot Src Line Src Ds0 LogPort Type Pkts Rcd Pkts Txd
====== ======== ======== ======= ======= ==== ======== =======
About the Announcement Service
The MGX 8260 Media Gateway can store and play announcement messages when configured for the
IPDC call control protocol. This service is useful when informing callers about a telephone number
change or other voice messages. The system can store up to 100 announcement files, with a total play
duration of 30 minutes.
File Encoding
The MGX 8260 Media Gateway supports the following encoding formats:
• G.711—A law and mu law
• G.726