Specifications

4-30
Cisco MGX 8260 Command Line Interface Guide
Release 1.2, Part Number 78-10987-01 Rev. B0, January, 2002
Chapter 4 Service Management
Viewing Active Calls
To view all active calls by resource, enter the lsacps command. The system displays summary call
information:
=======================================================================
Active Call Entries (lsacps) based on source
=======================================================================
Src Slot Src Line Src Ds0 LogPort Type Pkts Rcd Pkts Txm
======== ======== ======= ======= ==== ======== ========
Displayed Information Description
TransactionID The transaction identifier for the active call. Only
the backend platform software uses this number
CallID An identifier for the active call.
Source Slot number The slot number for the active call source. The
slot, line, and DS0 numbers uniquely define a call
while it is active.
Source Line number The line number for the active call source.
Source Ds0 The DS0 number for the active call source.
Source Logical Port number The logical port number for the active call source.
Destination Slot number The slot number for the active call destination.
Destination Line number The line number for the active call destination.
Destination Ds0 The DS0 number for the active call destination.
Destination Logical Port number The logical port number for the active call
destination.
Number packets transmitted The number of packets transmitted since call
setup.
Number packets received The number of packets received since call setup.
Number packets dropped The number of packets dropped since call setup.
Number of bytes transmitted The number of bytes transmitted since call setup.
Number of bytes received The number of bytes received since call setup.
Number of bytes dropped The number of bytes dropped since call setup.
Call Type: (voip/tdm) A value that identifies the call type:
1: Voice over IP.
2: Time division multiplex.