Specifications

4-29
Cisco MGX 8260 Command Line Interface Guide
Release 1.2, Part Number 78-10987-01 Rev. B0, January, 2002
Chapter 4 Service Management
Viewing Active Calls
To view all ports, enter the lsports command. The system lists all ports:
=======================================================================
Common Port Entries (lsports)
=======================================================================
Slot Port Line Port Type Ds0 Bit Map
============ ====== =============== ===============================
6 1 1 voice 1
6 2 1 voice 2
6 3 1 voice 4
6 4 1 voice 8
Viewing Active Calls
You view call activity and statistics by physical resource or transaction. These screens provide
read-only information that is useful for audits or trouble analysis.
Viewing Calls by Slot/Line/Port
To view call information for a physical resource, enter the lsacp command, specifying the slot, line and
DS0.
The system displays detail information for the active call:
=======================================================================
Active Call Entry (lsacp) by source
=======================================================================
TransactionID
CallID
Source Slot number
Source Line number
Source Ds0
Source Logical Port number
Destination Slot number
Destination Line number
Destination Ds0
Destination Logical Port number
Number packets transmitted
Number packets received
Number packets dropped
Number of bytes transmitted
Number of bytes received
Number of bytes dropped
Call Type: (voip/tdm)
Displayed Information Description
Slot The slot hosting the port
Port The common logical port number
Line The common physical line number for this port
Port Type The port type—voice for this release
DS0 Bit Map Common DS0 bit map for this port