Specifications
4-28
Cisco MGX 8260 Command Line Interface Guide
Release 1.2, Part Number 78-10987-01 Rev. B0, January, 2002
Chapter 4 Service Management
Configuration Tasks for Ports
To list the information for all voice ports, enter the lsvports command.
The system displays the voice port settings:
=======================================================================
Voice Port Entries (lsvports)
=======================================================================
Slot Port Line Ds0 Oper Status Dejitter Buffer Pkt Load Echo Tail
==== ==== ==== === =========== =============== ======== =========
13 1 1 1 idle enabled 1 tail64ms
13 2 1 2 idle enabled 1 tail64ms
13 3 1 3 idle enabled 1 tail64ms
13 4 1 4 idle disabled 1 tail64ms
Checking All MGX 8260 ports
You can view all existing MGX 8260 ports in a single report. From this report, you see a list of ports
and their slot, line, type, and DS0. Based on the line type, you proceed with port-specific commands to
configure the port or obtain more information.
Initial Dynamic Dejitter Size The initial length of the dejitter buffer, specified
in multiples of 10 msec.
Maximum Dynamic Dejitter Size The maximum length of the dejitter buffer,
specified in multiples of 10 msec.
Minimum Dynamic Dejitter Size The minimum length of the dejitter buffer,
specified in multiples of 10 msec.
Packet Loading Time The IP packet loading time for voice service,
expressed in multiples of 10 msec.
Echo Path Tail The length of the echo cancel tail
Displayed Information Description
Displayed Information Description
Slot The logical slot number of the NSC associated
with the port
Port The logical port number assigned to the port
Line The number of the DS1/E1 line associated with
the DS0 voice line
DS0 The number of the DS0 channel for the voice port
Oper Status The operating status of the voice port
Dejitter Buffer The status of the dejitter buffer, either enabled or
disabled
Pkt Load The IP packet loading time for voice service,
expressed in multiples of 10 msec.
EchoTail The length of the echo cancel tail