Specifications

4-23
Cisco MGX 8260 Command Line Interface Guide
Release 1.2, Part Number 78-10987-01 Rev. B0, January, 2002
Chapter 4 Service Management
Configuration Tasks for Lines
The system displays detail E-RDI information for the line:
=======================================================================
Sonet Line Entry (lssonetlnerdi)
=======================================================================
Sonet Line : 9.1
Support Path ERDI : disable
Transmitted Path Signal Label : 19
Expected Received Path Signal Label : 19
Received Path Signal Label : 0
Transmit PTID Length : 64
Transmit PTID Sync. pos. : 0
Transmit ID -
0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 d a
Expected Received PTID Length : 64
Expected Received PTID Sync. pos. : 0
Expected ID -
0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 d a
Received ID -
2020202020202020202020202020202020202020202020202020202020202020
202020202020202020202020202020202020202020202020202020202020 d a
Displayed Information Description
Sonet Line The slot and line number, expressed as slot.line
Support Path ERDI The state of the enhanced remote defect indication
for the SONET path, either disabled or enabled
Transmitted Path Signal Label The signal label to transmit in the SONET path
overhead:
• No specific payload type
• ATM
• Packet on SONET
Expected Received Path Signal Label The expected signal label from the SONET path
overhead:
• No specific payload type
• ATM
• Packet on SONET
Received Path Signal Label The actual label received
Transmit PTID Length The message length for the trace identifier:
• 16 bytes (SDH only)
• 64 bytes (SONET or SDH)
Transmit PTID Sync. pos. The position within a 16-byte message of the
synchronization byte
Transmit ID The trace identifier to transmit in the SONET path
overhead