Specifications

4-20
Cisco MGX 8260 Command Line Interface Guide
Release 1.2, Part Number 78-10987-01 Rev. B0, January, 2002
Chapter 4 Service Management
Configuration Tasks for Lines
Line Status(1) The line status, expressed as a bitmap:
Bit 0: No defect present
Bit 1: Section LOS (Loss of Signal)
Bit 2: Section LOF (Loss of frame)
Bit 3: Line AIS (Alarm Indication Signal)
Bit 4: Line RDI (Remote Defect Indication)
Bit 5: Path AIS
Bit 6: Path LOP (Loss of Pointer)
Bit 7: Path UEQ (idle)
Bit 8: Path TIM (Trace Identifier Mismatch)
Bit 9: Path SLM
Bit 10: Path RDI
Bit 11: Path ERDI server defect
Bit 12: Path ERDI connectivity defect
Bit 13: Path ERDI payload defect
Bit 14: Performance failure LOS
Bit 15: Performance failure, section LOF
Bit 16: Performance failure, line AIS
Bit 17: Performance failure, line RFI
Bit 18: Performance failure, path AIS
Bit 19: Performance failure, path LOP
Bit 20: Performance failure, path UEQ
Bit 21: Performance failure, path TIM
Bit 22: Performance failure, path SLM
Bit 23: Path ERDI server failure
Bit 24: Path ERDI connectivity failure
Bit 25: Path ERDI payload failure
Bit 26: Performance failure, path RFI
Bit 27: Line loopback (remote loop)
Bit 28: Serial loopback (local loop)
Bit 29: Parallel loopback (local loop)
Displayed Information Description