Specifications

4-19
Cisco MGX 8260 Command Line Interface Guide
Release 1.2, Part Number 78-10987-01 Rev. B0, January, 2002
Chapter 4 Service Management
Configuration Tasks for Lines
The system displays detail information for the SONET line:
=======================================================================
Sonet Line Entry (lssonetln)
=======================================================================
Sonet Line : 9.2
Medium Type : sonet
Time Elapsed in Interval : 12
Line Valid Intervals : 0
Line Coding : sonetMediumNRZ
Line Type : sonetMultiMode
Circuit Identifier : PMC-PM5351-S/UNI-TETRA ver.0x00
Admin Status : up
Line Status(1) : 5402a
Line Status(2) : 10
Interface Type : oc3
Frame Type : sts3c
Loopback State : sonetNoLoop
HCS masking : disable
Payload Scrambling : enable
Frame Scrambling : enable
Transmit Clock Source : localTiming
Support Path ERDI : disable
Displayed Information Description
Sonet Line The slot and line number, expressed as slot.line
Medium Type The physical medium, either SONET or SDH
Time Elapsed in Interval The elapsed time of the current error-
measurement period, expressed in seconds
Line Valid Intervals The number of prior intervals for which valid data
was stored
Line Coding The data coding scheme this line, always NRZ.
Line Type The type of optical fiber, either single or
multi-mode depending on the back card installed
Circuit Identifier The transmission vendor’s circuit identifier
Admin Status The administrative status for the line, always Up