Specifications

4-6
Cisco MGX 8260 Command Line Interface Guide
Release 1.2, Part Number 78-10987-01 Rev. B0, January, 2002
Chapter 4 Service Management
Configuration Tasks for Lines
Viewing Summary DS1/E1 Information
To list summary DS1/E1 information for all lines, enter the lsds1lns command.
The system displays summary information for all DS1/E1 lines:
=======================================================================
DS1 Lines (lsds1lns)
=======================================================================
Slot.Line Line Type Line Coding SignalMode LED Status
========= =========== ============= ============= ==========
3.1 dsx1E1-CRC-MF dsx1HDB3 bitOriented Solid GREEN
3.2 dsx1E1-CRC-MF dsx1HDB3 bitOriented Solid GREEN
3.3 dsx1E1-CRC-MF dsx1HDB3 bitOriented Solid GREEN
3.4 dsx1E1-CRC-MF dsx1HDB3 bitOriented Solid GREEN
Line Loopback Config The loopback configuration of this interface.
• dsx1NoLoop
• dsx1PayloadLoop
• dsx1LineLoop
• dsx1OtherLoop
Transmit Clock Source The clock source for the transmit signal.
• loopTiming (reserved for future use)
• localTiming
• throughTiming (reserved for future use)
Circuit Identifier The Cisco equipment circuit identifier, displayed as a text
string.
IPDC Echo Cancel The state of the echo canceller for the IPDC protocol.
Alarm Alarm state, either major, minor or no.
<alarm list> The state of individual alarms. For more information, see the
alarm chapter.
LED Status The front panel LED indication for this line.
Line Status The administrative status for the line, either up or down.
Displayed Information Description
Displayed Information Description
Slot.Line The logical slot number and line number for the
NSC or BSC
Line Type The line mode
Line Coding The coding format
Signal Mode The signal mode for the transmit direction
LED Status The status of the front panel LED