Specifications

9-362
Cisco MGX 8260 Command Line Interface Guide
Release 1.2, Part Number 78-10987-01 Rev. B0, January, 2002
Chapter 9 Command Reference
swcd
swcd
Switch to redundant NSC.
swcd Card
Syntax Description
Defaults No default behavior or values.
Command Modes Security level 4
Command History
Usage Guidelines Use this command to switch between the active and standby cards of a redundant pair.
Examples The following example makes the card in slot 1 the standby instead of the active card in a redundant
pair.
swcd 1
Related Commands
Card The slot number of active card to switch for the standby redundant card
Release Modification
1.0 This command was first introduced.
Command Description
addreds Add a card redundancy pair
delreds Delete a card redundancy pair
lsreds List redundancies