Specifications

9-358
Cisco MGX 8260 Command Line Interface Guide
Release 1.2, Part Number 78-10987-01 Rev. B0, January, 2002
Chapter 9 Command Reference
onbertds1
Command Modes Security level 3
Command History
Usage Guidelines Use this command to start the BERT on the specified DS1 line. To specify which DS0s participate in a
Bert test, use the Ds0 parameter. For example, 0000000000110101 specifies that the DS0 number 1, 3,
5 and 6 are participating. Convert this binary number to a decimal number and then enter that number
on this option. For example, binary 0000000000110101 equals 53 decimal. Enter 53 for this option in
this example
Examples The following example starts a BERT of the DS1 line at slot 1 line 1, using the 11 00 test pattern a test
rate of 10%.
onbertds1 1.1 10 1
Related Commands
Release Modification
1.0 This command was first introduced.
Command Description
lsbertds1 List DS1 BERT results
lsds1ln List DS1 line
lsds1lns List DS1 lines
offbertds1 Stop BERT on DS1