Specifications

9-250
Cisco MGX 8260 Command Line Interface Guide
Release 1.2, Part Number 78-10987-01 Rev. B0, January, 2002
Chapter 9 Command Reference
lsemm
Usage Guidelines Use this command to display the specified environmental measurement taken by a single sensor.
Sensors measure the following conditions: temperature of the chassis, Switch Control Card (SCC) and
Narrowband Service Card (NSC); the voltage of the chassis and all cards, SCC, NSC, and Distribution
Matrix Card (DMC); the fan speed of the chassis. Output is degrees Celsius for temperature, volts for
chassis, percentage of voltage for card, and RPM for fan sensor. For more information, see Viewing
Environmental Information, page 6-21.
Examples The following example lists the voltage of the chassis.
lsemm 100 3 99923
Related Commands Command Description
lsemms List environmental monitoring sensors