Specifications

3-5
Cisco MGX 8260 Command Line Interface Guide
Release 1.2, Part Number 78-10987-01 Rev. B0, January, 2002
Chapter 3 Card Management
Configuration Tasks for Cards
Mismatch Reason The reason the card was last reset, as follows:
• shellReset
• hardReboot
• softRebootNoImage
• softReboot
• chipError
• eventLogReset
• taskError
• softwareUpgrade
• gracefulSwitchover
• dmcRemovedSwitchover
• sccBcRemovedSwitchover
• appsInitFailed
• plfmTimerExpired
• ideReformat,
• unknownResetReason
Integrated line alarm
state
The state of the integrated line alarm for the card:
• No Alarm
• Minor Alarm
• Major Alarm
Line performance
alarm state
The state of the line performance alarm for the card:
• No Alarm
• Minor Alarm
• Major Alarm
EMM temperature
alarm state
The state of the EMM temperature alarm for the card:
• No Alarm
• Minor Alarm
• Major Alarm
EMM voltage alarm
state
The state of the EMM voltage alarm for the card:
• No Alarm
• Minor Alarm
• Major Alarm
SW error alarm state The state of the software error alarm for the card:
• No Alarm
• Minor Alarm
• Major Alarm
Displayed Information Description