Specifications

3-4
Cisco MGX 8260 Command Line Interface Guide
Release 1.2, Part Number 78-10987-01 Rev. B0, January, 2002
Chapter 3 Card Management
Configuration Tasks for Cards
Failure Reason The reason of the last card failure, as follows:
• hwMSMFailed—One or both MSMs failed
• hwSarFailed—Sar failed
• hwPCIAErrInt—PCI-A error interrupt
• hwASXFailed—ASX failed
• hwALBMFailed—ALM or ABM switch port failed
• hwCubitFailed—Cubit failed
• hwBusCycleTmOut—Bus cycle timeout
• hwHardDrvFailed—Hard drive failed
• hwMgmtEthFailed—Management Ethernet failed
• hwDMCFailed—DMC failed
• hwSerlPtFailed—Serial port failed
• swStrvBkgdTask—Background task starvation
• swKeyTaskFailed—Critical task failed
• swFailReason—Software failed
• hwFailReason—Hardware failed
• heartBeatLost—Lost the heartbeat
• imageDownLoadFailed—Image download failed
• failedToMoveToActive—Transition to active state failed
• failedToInitApps—Application initialization failed
• configDownLoadFail—Configuration download failed
• remoteCardFailed—Remote card reported a failure
Reset Reason The reason for the mismatch for the card, as follows:
• noMismatch
• configMismatchHw—configuration file and hardware do not match
• fcAndBcMismatch—the front and back card do not match
• daughterCardBcMismatch—the daughter card and back card do not
match
• peerHardWareMismatch—the two SCC cards do not match
• dmcMismatch—DMC configuration mismatch with the hardware
• noBackCard—No back card
• noDaughterCard—None or invalid daughter cards
Displayed Information Description