Specifications

9-219
Cisco MGX 8260 Command Line Interface Guide
Release 1.2, Part Number 78-10987-01 Rev. B0, January, 2002
Chapter 9 Command Reference
lsds1totst
lsds1totst
List DS1 total statistics.
lsds1totst Location
Syntax Description
Defaults No default behavior or values.
Command Modes Security level 5
Command History
Usage Guidelines Use this command to display the totals of performance statistics of the specified DS1 line gathered over
the past 24 hours. For more information, see Viewing Total T1 Statistics, page 7-2.
Examples The following example shows the totals of performance statistics of the DS1 line at slot 1 line 1 over
the past day.
lsds1totst 1.1
Related Commands
Location The slot and line number, delimited by a period, of the DS1 line.
Release Modification
1.0 This command was first introduced.
Command Description
addds1ln Add DS1 line
chds1alm Change DS1 alarm severity and thresholds
chds1ln Change DS1 line
clrds1lnst Clear DS1 line statistics
delds1ln Delete DS1 line
lsbertds1 List DS1 BERT results
lsds1alm List DS1 alarm thresholds
lsds1curst List DS1 current statistics
lsds1cursts List statistics for all DS1 lines
lsds1intst List DS1 interval statistics
lsds1ln List DS1 line
lsds1lns List DS1 lines
lsds1lnst List DS1 statistics